Jump to content
SAU Community

Recommended Posts

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Trial fitting my Sinco Customs manifold on to the RB30

Hmm, whats the plan for your oil return? Seems like it would be a bit tough running it past the manifold without it touching or getting superheated.

Hmm, whats the plan for your oil return? Seems like it would be a bit tough running it past the manifold without it touching or getting superheated.
Seems to be more room in Stagea engine bay than Skyline. Will make sure its OK!

I'm noticing that people seem to be spending a lot of time making there engines look pretty. Call me lazy I just wanted the bastard thing running sooner, my car is more like the ugly porn star. It does the job damn well but just a little ghetto at the same time.

post-21501-1289916887_thumb.jpg

Plumbing is arse about face to give enough space for a back seat.

Aiming for 800hp in 15ft - should be fun!

Having trouble uploading more pics 'You did not select a file to upload'???

Edited by roba

Here is my 26/30 going into my black r32

It doesnt look much yet as Im still porting the head.

using

groupA turbos.

550 injectors

2x rb25 afm

extended sump

Ported stock oil pump

lightweight steel flywheel

Just a mild one I will pull the pin at 17psi and 7000 rpm

Just a pic from the top at the moment I just got the covers back

003-42.jpg

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...