Jump to content
SAU Community

Recommended Posts

got my alignment done

can someone have a squiz and tell me if the messed anything up?

i asked him to dial in as much caster as possible and he seemed confused and said "i don't think you will notice that on road tyres mate"

Thanks

Were you in Tassie?

H

Faark dude, even with my best squint I can't read that properly, hope someone's got better eyes than me. I'll have 6 beers and come back to it.

Around +5 deg 22" left, +4 deg 41" caster; -1 deg camber and +0.5mm toe was optimal on my old r31, and it needed camber/caster adjustable strut tops to get there; obviously there'll be some differences given the rear can also be aligned. How were they adjusting the caster? Are your caster rods adjustable?

On my NM35 they're not...

I.ll scan it in, didn't realise the quality was so bad

Installed an 8 point earthing kit and, yes, including the transmission bracket when earthing an M35 makes a bit of difference to gear shifts (still nowhere near a shift kit obviously)

Edited by iamhe77

dropped mine at the workshop to finally get the revalve kit for the front shocks fitted: hopefully handles like a demon again once I get it back...

All that's left now is to get the roof rail replacement kit fitted and painted, than tidy up the engine bay...

compression test yesterday :(

#1 - perfect :D

#2 - perfect :D

#3 - prefect :D

#4 - perfect :D

at this point I thought I had dodged a bullit and I may just have to replace plug's

#5 - perfect :down:

#6 - F#$king nothing :(:(

P.S.anyone want a cheap root....need cash quickly....spooning after is extra!

Edited by Jetwreck
compression test yesterday :(

#1 - perfect :D

#2 - perfect :D

#3 - prefect :D

#4 - perfect :D

at this point I thought I had dodged a bullit and I may just have to replace plug's

#5 - perfect :down:

#6 - F#$king nothing :(:(

P.S.anyone want a cheap root....need cash quickly....spooning after is extra!

wang some oil down that bore, if it comes up then its the rings orring lands

if it stays down then its in the head which would mean that you don't have to rebuild the block

rnd 3! the first settings on the front are way off cos i changed the steering rack ends

post-51118-1285022200_thumb.jpg

and aster is adjusted with the stock bushes, you only get a tiny bit of adjustment tho

Edited by pipster11
am i lining it up correctly, does that say -16.96 degrees left and +3.02 Degrees right for caster?

yeah, might ask them about that cos it still pulls a tiny bit to the left (no road camber correction) but i guess they only measured the caster on one side?

Here is my suspension settings recipe. You obviously can't get this amount of castor without adjustable arms so i have adjustable castor arms and adjustable rear camber arms. Can't afford the front camber adjusters at this point. You can get a small amount of adjustment with eccentrtic bushes. The value of lots of castor is straight line stability at high speed. If you can't get as much as you want you want them at maximum and then back off rhs to 1/4 degree less than lhs.

Nissan Stagea RS4T

Front

Caster Left positive 6 degrees

Right positive 5.75 degrees

Camber Left 1.0 degree negative

Right 1.0 degree negative

Toe in Left zero

Right zero

Rear

Camber Left negative 0.5 degrees

Right negative 0.5 degrees

Toe in Left minus 2mm

Right minus 2mm

yeah, might ask them about that cos it still pulls a tiny bit to the left (no road camber correction) but i guess they only measured the caster on one side?

There has to be an error in the print out. With that much + caster on the left and so little on the right it would be undriveable.

You would probably find your wheel hitting the rear of the wheel arch on the left side and the front of the wheel arch on the right.

Stagea is in the shop getting GPS tracking fitted to compliment the alarm/kill switch/club lock. f**k thieves! :rofl2:

Goes for a dyno tune next week. Aiming for 220-230 awkw from the stock injectors :cool:

Then next is Z32 afm and 550cc injectors.

Stagea is in the shop getting GPS tracking fitted to compliment the alarm/kill switch/club lock. f**k thieves! :cool:

Goes for a dyno tune next week. Aiming for 220-230 awkw from the stock injectors :ninja:

Then next is Z32 afm and 550cc injectors.

who's fitting up the gps tracking? can ya PM me with a cost, with the amount of imports getting stolen in Adelaide lately, i'd def be keen to get some fitted to my off road stagea!

ready for motor out......1 hours work to remove the whole front of the car....gotta love M35's :)

Good effort! Shit, you dont mess about do you :P Is it repairable, or will you be sourcing a new engine?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...