Jump to content
SAU Community

Recommended Posts

So we picked up the wife's A3 at the Goldy yesterday (came up from Melb by truck), & did all the req'd crap to get it registered. (Who new a set of Euro plates cost $400 :O What a rip off!)

The RACV report we got before buying the vehicle said the car was due for a service so I had a look in the log book. Impressively the service intervals are at 15,000kms (typical of a lot of vehicles, I know) & so I was expecting the last service to have been done ~15K ago. But no, the car totally missed the last service so it's nearly 30K since it's last oil change!!!

Furthermore, it looks like the service it missed was a bigish one, with all the engine belts needing to be changed. Grrr.

Since this is the recipe thread, I'm thinking of developing a recipe for broiled car salesman. Guaranteed to leave a bad taste in your mouth, lol.

In other news... I'm a lazy fecker. Dales bar isn't on yet, so I had a look at where it goes in some pics. Now I haz a worry. I have a lot of (aftermarket) pipework through there, so I hope it fits.

Be annoyed if it doesn't.

So we picked up the wife's A3 at the Goldy yesterday (came up from Melb by truck), & did all the req'd crap to get it registered. (Who new a set of Euro plates cost $400 :O What a rip off!)

The RACV report we got before buying the vehicle said the car was due for a service so I had a look in the log book. Impressively the service intervals are at 15,000kms (typical of a lot of vehicles, I know) & so I was expecting the last service to have been done ~15K ago. But no, the car totally missed the last service so it's nearly 30K since it's last oil change!!!

Furthermore, it looks like the service it missed was a bigish one, with all the engine belts needing to be changed. Grrr.

Since this is the recipe thread, I'm thinking of developing a recipe for broiled car salesman. Guaranteed to leave a bad taste in your mouth, lol.

car salesmen cant be trusted!!

I would be sending the car back

Leon, that is pretty disapponting, knowing that you would have asked him about service history and when the thing was last serviced.

You could obviously ask some appropriate questions of the Gent, and make your feelings felt. Get him to pay for the service at your nearest audi dealer

Funny, I thought I asked all the right questions. His answer when asked about the service history was 'it has the service log book & has been serviced at an Audi dealership from new". Obviously that doesn't mean it is up to date on the services. I very nearly asked him to scan in the log book & email it to me, but I'd already bugged him about a million other things (had dent doctor fix a small dent etc) & I expected it would need a service anyway :/ .

It's booked in on Friday to get a long needed going over. I'm using a local "European specialist" who will hopefully know what he's looking at (doesn't hold breath). And since it has a nationwide warranty, I'm telling him to look closely at anything that could be considered prone to failure. Won't be long & I'll be DIY'ing this one too, I suppose.

Ultimately the missus is over the moon with hew 'new' car (also means I'm free to play M35 to my hearts content :D ) & we got what I consider to be a bargain in the A3 field at present. All happy in the commsman household - for now.

Oh, nearest Audi dealer is about 100km away.

Edited by Commsman

Euro specialist should be fine with it I guess. I'm far from an expert, but I gathered that most of the VAG cars use the same 2.0 diesel, maybe gearbox?

Anyway, as long as it looks fairly clean down the guys of it, should be fine. I had a Lexus that skipped a service altogether, was fine, olds have a rover that was the same, still keeps on going, only with a appetite for suspension parts/bushes.

Not that i'd recommend it at all, but its not the end of the world by a long shot.

Euro specialist should be fine with it I guess. I'm far from an expert, but I gathered that most of the VAG cars use the same 2.0 diesel, maybe gearbox?

I thought they were all exactly the same, but there are minor differences according to the experts. My guess is they are mainly system control (ECU etc) or relatively insignificant ancillary equipment, but I really don't know.

It is certainly a clean car. Looks like it's never been driven out of the city. It's all gonna change now, lol.

Oh, I just stuck a torch under there to have a look. I couldn't remember the exact route of the external gate plumb back. There's also another exhaust brace that fits up in there too that I remembered. Been at work, only just got home.

When's the key turning on yours?

It lives, I started it tonight. Just a few little jobs to do and it's back on the road. I need to learn how to bleed the Attessa and solder a few wires back together under the dash. Power steering was a bitch to bleed.

It lives, I started it tonight. Just a few little jobs to do and it's back on the road. I need to learn how to bleed the Attessa and solder a few wires back together under the dash. Power steering was a bitch to bleed.

lolz......attessa is fun fun fun!!!

It lives, I started it tonight. Just a few little jobs to do and it's back on the road. I need to learn how to bleed the Attessa and solder a few wires back together under the dash. Power steering was a bitch to bleed.

How'd you do the PS? Just lock to lock about 30 times?

I had to do mine, since we were pushing the car around between workshops.

Attesa Plug under the dash. 2 person job- why 3 Iain - dont need to stay in the boot!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...