Jump to content
SAU Community

Recommended Posts

Here's hoping it comes back a monster!

Perhaps a definitive answer on AVO's business ethics while were at it. We can see if they really were just too lazy to do better for the customer.

Maybe AVO just dont know how to get the car to come on boost sooner? Maybe there is an issue with the car? There may be something causing a restriction or an inferior/failing part. (thats not having a go at the car or the owner or AVO, its just a general comment)

A second opinion is always good if your not happy with the work done on the car but i wouldnt be to hard on AVO just yet.....

I know my car has recently been switched to E85 and the dyno figure actually went backwards.... am i disapointed, not just yet. We lost 20kwatw's, but the car was a lot harder to keep on the dyno this time around. One of the most reliable ways to tell whether it has gone forwards or not is to run it down the quarter. As long as my car runs quicker than 133mph i will be happy with the loss of power. If it doesnt i will quiz Yavuz as to what may be the cause. It made good power on pump, but maybe the setup isnt right for E85 and i may need to change something to suit it....

Edited by ido09s

Maybe AVO just dont know how to get the car to come on boost sooner? Maybe there is an issue with the car? There may be something causing a restriction or an inferior/failing part. (thats not having a go at the car or the owner or AVO, its just a general comment)

A second opinion is always good if your not happy with the work done on the car but i wouldnt be to hard on AVO just yet.....

I know my car has recently been switched to E85 and the dyno figure actually went backwards.... am i disapointed, not just yet. We lost 20kwatw's, but the car was a lot harder to keep on the dyno this time around. One of the most reliable ways to tell whether it has gone forwards or not is to run it down the quarter. As long as my car runs quicker than 133mph i will be happy with the loss of power. If it doesnt i will quiz Yavuz as to what may be the cause. It made good power on pump, but maybe the setup isnt right for E85 and i may need to change something to suit it....

just throw it on a hub dyno

Maybe AVO just dont know how to get the car to come on boost sooner? Maybe there is an issue with the car? There may be something causing a restriction or an inferior/failing part. (thats not having a go at the car or the owner or AVO, its just a general comment)

My point exactly. The owner has commented that they said they could try adjust the cam gears but this is the best they could do. The owner has queried the issue and soon we will see if it was a lack of commitment to the job that let him down. Short of not knowing how, all the above mentioned issues are something the shop should have tried to track down for the customer, not knowing how is something they should omit to the customer if it is the case.

I'd hold back any comment on AVO until its actually run on the familiar dyno, it could easily come down to ramp rates.

Agreed, yet I am not slagging them. I am merely saying we will see if it was a lack of commitment or not. So, we will see.

^ that should be epic, there is a guy in Europe on the way to his tuner with his R33 GTS25t running a FullRace twin scroll GTX3582R as we speak, that'll be interesting to see the result of too.

Whats the rest of the setup? Are you going to be able to lean on it a bit?

^ that should be epic, there is a guy in Europe on the way to his tuner with his R33 GTS25t running a FullRace twin scroll GTX3582R as we speak, that'll be interesting to see the result of too.

Whats the rest of the setup? Are you going to be able to lean on it a bit?

yeah leaning on it shouldnt be a problem running;

cp 9.0:1 pistons

nitto rods

dry sump set up

full balanced engine from harmonic balancer to clutch pressure plate

jim berry clutch

ported head

tomei springs

drop in cams

its in a silvia to and going to be on E85 cant wait been building it for 4 YEARS!:merli:

the pic is with the normal GT35 turbo that i sold

post-59990-0-60688900-1309230100_thumb.jpg

Edited by BMYHOE

I am looking forward to seeing this set up working at its potential.

Trent isn't tuning. Just dyno running and diagnosing the lazy curve.

I'd hold back any comment on AVO until its actually run on the familiar dyno, it could easily come down to ramp rates.

Exactly. They have done right by me thus far. And their work has been very good.

Oh hell yeah. This thing is going to be insane, hope you have a large fuel system and a dose of crazy!

yeah twin 044's surge tank dash 8 fuel lines and id2000 injectors

ill be happy with 360 - 380kws

Are you picking it up today?

Yeh tonight. Interesting to see what he says.

My point exactly. The owner has commented that they said they could try adjust the cam gears but this is the best they could do. The owner has queried the issue and soon we will see if it was a lack of commitment to the job that let him down. Short of not knowing how, all the above mentioned issues are something the shop should have tried to track down for the customer, not knowing how is something they should omit to the customer if it is the case.

Agreed, yet I am not slagging them. I am merely saying we will see if it was a lack of commitment or not. So, we will see.

All very valid unbiased thoughts. Hopefully I will get my answer :)

I'm assuming ur referring to the 3582 lol

Yep, I tried to edit my post to clarify that when I discovered people had responded while I was typing that out and my interwebs got its glitch on and wouldn't let me.

yeah twin 044's surge tank dash 8 fuel lines and id2000 injectors

ill be happy with 360 - 380kws

If you aren't going to be shy on boost then I'd be surprised if you didn't blow that figure out of the water - even on a harsh dyno. Who is tuning it/what kind of dyno is going to be used? On E85 and a bunch of boost I'm expecting there is a good chance it'll make quite eye opening power, and bring it on quite quickly :) Will be particularly interested in seeing when it cracks 200kw...

yeah leaning on it shouldnt be a problem running;

cp 9.0:1 pistons

nitto rods

dry sump set up

full balanced engine from harmonic balancer to clutch pressure plate

jim berry clutch

ported head

tomei springs

drop in cams

its in a silvia to and going to be on E85 cant wait been building it for 4 YEARS!:merli:

the pic is with the normal GT35 turbo that i sold

thats insane :thumbsup:

yeah its a RB30, 26 head forgot to mention that - thought we were in the RB30 section :P

Yep, I tried to edit my post to clarify that when I discovered people had responded while I was typing that out and my interwebs got its glitch on and wouldn't let me.

If you aren't going to be shy on boost then I'd be surprised if you didn't blow that figure out of the water - even on a harsh dyno. Who is tuning it/what kind of dyno is going to be used? On E85 and a bunch of boost I'm expecting there is a good chance it'll make quite eye opening power, and bring it on quite quickly :) Will be particularly interested in seeing when it cracks 200kw...

im will be talking to a few tuners im in sydney so it will be out of JEM/Powertune/unigroup still probly 4-5months off from any dyno time

quick question guys would a 3 1/2 inch dump to 4inch cat back be over kill for my set up? OR should i just stick to 3 1/2 inch the whole way?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...