Jump to content
SAU Community

Recommended Posts

This has always puzzled me....

I know the following have the 6 speed getrag gearbox:

R34 GTR

M3 EVO

E39 M5

Supra, Non VVTI/VVTI

Mitsubishi GTO

Are there others that use it?

Anyway, are the boxes all the same? Ie interchangeable... Someone know? Cheers.

no?

No they are not interchangeable, and in most cases are completely different gearbox designs between different cars. Getrag gearboxes usually have an integrated bellhousing, i.e. designed to fit a specific engine block and can't be removed. Because of this, even gearboxes of the same model, e.g. Getrag 260, will not be interchangeable. The Getrag 260 was used in VS (series 3) / VT / VX / VY V6 Commodores, Beamers and Jags...yet they are not intercompatible between the manufacturers (unless you wanna do some cutting and welding conversion work).

Your Supra uses a Getrag V160 or V161, for reference. I am not certain if this gearbox was placed in any other vehicle, but I doubt it.

Getrags also have the wonderful advantage of being European and therefore rather expensive to repair.

S15 uses an Aisin 6 speed, which has an integrated bellhousing despite being much the same gearbox used in the Lexus IS200, Mazda MX5, Mazda RX8 and Honda S2000 :rolleyes:

Aisin also produced the 6 speed used in the VZ Commodore V6.

Also, the S15 gearbox is not that weak - two bathurst 24 hour races, several endurance and we've never broken one. People just like to drift with triple plate clutches and 250rwkw through a drivetrain that was originally designed to handle 180fkw~ from factory in a lightweight sports coupe...

Yeah, not a fan personally...I've sold heaps of S14 gearboxes to S15 owners who are under the impression the S14 is much stronger. I don't know where the consensus came from...I disagree, but am happy to take their 6 speed off their hands.

In my opinion the Aisin is a much better box all round. The only advantage of the S14 box is that you can install a PPG gearset in it. In standard form though, it's still just a small sports sedan gearbox and nothing that I'd want to go drifting with anyway...let alone downgrading retrograding my S15 and losing an overdrive.

ya but for track purposes, 5 speed is much better supposedly...even same with the 34 gtrs....they convert to 5 speed for better gear ratios and power along each gears....

There's a cheaper way to make the r34's move a bit quicker than having to convert to 5sp.

Yeah, not a fan personally...I've sold heaps of S14 gearboxes to S15 owners who are under the impression the S14 is much stronger. I don't know where the consensus came from...I disagree, but am happy to take their 6 speed off their hands.

In my opinion the Aisin is a much better box all round. The only advantage of the S14 box is that you can install a PPG gearset in it. In standard form though, it's still just a small sports sedan gearbox and nothing that I'd want to go drifting with anyway...let alone downgrading retrograding my S15 and losing an overdrive.

I see...

I would have thought the same as you Birds.

The 6 speed in the S15 seems very good.

Has "a" Getrag 6 speed...your focus uses a transaxle which altogether is very different from the rest of these RWD platforms...the Calibra Turbo also used a Getrag 6 speed transaxle in AWD form.

Has "a" Getrag 6 speed...your focus uses a transaxle which altogether is very different from the rest of these RWD platforms...the Calibra Turbo also used a Getrag 6 speed transaxle in AWD form.

And look how well THAT turned out...lol

Hahaha well, transfer case aside, the gearbox isn't too bad :laugh:

More of a cruiser than a performance vehicle though. I'd never run insane amounts of power through one of those cars.

This has always puzzled me....

I know the following have the 6 speed getrag gearbox:

R34 GTR

M3 EVO

E39 M5

Supra, Non VVTI/VVTI

Mitsubishi GTO

Are there others that use it?

Anyway, are the boxes all the same? Ie interchangeable... Someone know? Cheers.

Depends 'which' 6 speed you're talking about.

I know there's a 420G used in the BMW E39 which is a gearbox for RWD. The 6spd 466 AWD transaxle series is in lots of Porsche's, Audis and the GTO, the 448 6speed AWD transaxle tends to get used in the upper end Porsches. For what its worth, they are capable of holding big horsepower around 450 or so stock and after that they do need some (relatively inexpensive) bracing modifications to the housing and transfer cases, if you do manage to break one they do cost a veritable fortune. Most people break them because they're terrible, the boxes themselves are actually quite good! :(

In my experience a lot of them aren't interchangeable if that makes it any easier for you. The very hard way is to contract Getrag and be prepared to go slightly crazy in the process...

Edited by MK2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
×
×
  • Create New...