Jump to content
SAU Community

Recommended Posts

What exactly did webs say in the press conference? Had to leave after the race so missed it, and can't find it online

Shame McLaren won in a way but also we can't let Seb get too far away, so it was good day for the racing and good day for us in terms of points for the team.

http://www.formula1.com/news/headlines/2011/4/11953.html

+1

It was an awesome drive but he had something the rest didn't. There is also no doubt the reason Hammo won was because he had that 1 set of virgin softs. Just look at the lap times he did on thats set of tyres.

A non working KERS unit ?

Awesome effort webber

18 to 3rd with a car with issues.

You can bet RBR will be working on that kers system with that race result

Waiter, I'd like a large dish of humble pie, please ...

Forget what I said about Webz not having his head together. RBR might need to think about how long it takes to warm up hard tyres in quali, but there's nothing wrong with the way Mark's driving. To get with 3 secs of Vettel at the end, closing fast, and only 7 secs behind the winner ... fantastic effort.

It will be interesting to see if this affects the way teams approach qualifying, since Webber having three sets of brand-new softs surely helped him, but bear in mind that that would have only helped him for the first couple of laps. After that he was in the same boat as everyone else ... he just rowed it better.

Brilliant! McLaren 1st and Webber pulled off one of the most amazing drives I've seen in a long time. Was extremely exciting racing too, these Pirelli tyres are brilliant!

It's exactly what the FIA wanted them to do, and it's worked brilliantly. Guys closing down the leaders at 2-3 secs a lap is what we want to see. So much better than follow-the-leader/pit stop/follow-the-leader.

Gotta say I'm quite liking DC on the com-team. Unlike Legard, when he talks he has something worthwhile and informed to say.

Hope the BBC keep Martin and David going for the foreseeable future.

Agreed.

PLUS he supplies the laughs with some odd pronunciations at times :D

Honestly, not a fan of the DRS because in some cases it is warranted in some not.

For instance,

Hamilton on Button,

Arguably Jense got a better drive out of the corner and being that they are in the same car Lewis probably wouldn't have had enough to pass him.

however, enter the moveable wing and bang he's made an overtake he probably doesn't quite deserve.

Now yes, I hear the cries of button could get him back next lap but What happens when it is the last lap or the entry to the pit lane.

my philosophy is that no one should ever be disadvantaged for being in front.

PS Awesome Drive from Webz

Waiter, I'd like a large dish of humble pie, please ...

Forget what I said about Webz not having his head together. RBR might need to think about how long it takes to warm up hard tyres in quali, but there's nothing wrong with the way Mark's driving. To get with 3 secs of Vettel at the end, closing fast, and only 7 secs behind the winner ... fantastic effort.

It will be interesting to see if this affects the way teams approach qualifying, since Webber having three sets of brand-new softs surely helped him, but bear in mind that that would have only helped him for the first couple of laps. After that he was in the same boat as everyone else ... he just rowed it better.

I may have misheard but didn't Brundle or DC say something about the softs not responding well to being used twice, like they lose a fair bit that they don't get back when reheated? Nowhere near his wording there lol. The softs are constantly degrading though, so having a new set means you're always 2 laps better off in terms of grip. I wonder which of the front runners will gamble a poor position on Saturday for a better one on Sunday?

The little quips are already classic- Like when he said "The only way that radio message could've been any scarier is if it was delivered in the dark"

Fk I laughed at that hahaha

tyre's are great this year, i still think they should run re-treads and the guys with the biggest hairy round things will see how far they can be pushed (be like the Adelaide F1 in 86) and develop good dodgy tyres. Also heaps of front wind and a lot less rear to prevoke a lot more overstear would be fantastic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...