Jump to content
SAU Community

Recommended Posts

The question is, was kers worth the 2 tenths difference? I think it's accepted as being worth more than that. Probably why Vettel was all laughs and webs wasn't smiling. He looked embarrassed by being on pole because of it. Shows character.

Edited by gts-4 dreamer

Good to see my boy Alonso splitting the Macs

And I was too busy at work to get my tips in ... fark it...please dont tell me the week I dont get my tips in Mark is going to get up :)

Forgot to get mine in before quali as well...What's the penalty for putting them in post quali?

edit: Pick before qualifying to retain your Early Guru Point (EGP) valued at 2pts.

They go on and on about using the softs, but at the end of the day, it's one lap... So at any point you'd have a set of tires 1 lap fresher.

That's not taking into account any cycling issues there might be (heating/cooling and reheating etc)

They go on and on about using the softs, but at the end of the day, it's one lap... So at any point you'd have a set of tires 1 lap fresher.

That's not taking into account any cycling issues there might be (heating/cooling and reheating etc)

One blistering qualifying lap on qualifying power, a qualifying lap is worth 5 or so laps.

Mark looks far from comfortable.

Seb looks supremely confident.

Hammo looks content knowing he's done his best.

And I'm stoked Nando has resigned until I turn 40..... he just looks "right" with Fezz.

However, feels weird that I don't actually feel excited how this race will turn out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...