Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

structural integrity for a track car should be no problem - roll cage should offer more than the stock damaged components ever did - but I suppose I am speaking through my arse without having seen the car

mildly damaged JDM for race only - about 40-50k. undamaged JDM car for track only 70k or there abouts

Not too mention if the standard spot welds are drilled/new parts used and plug welded it will stronger than it was originally

Am I the only one who thinks that it was pretty expensive at $80K? I guess one day it can be re-registered (although no longer in NSW right?) and will be worth $120K-$130K but you'd have to be very tight with what you spent repairing it to make a buck out of it.

Am I the only one who thinks that it was pretty expensive at $80K? I guess one day it can be re-registered (although no longer in NSW right?) and will be worth $120K-$130K but you'd have to be very tight with what you spent repairing it to make a buck out of it.

Yes thats correct, it wont be able to be registered in NSW again but people tend to get them registered in other states instead

  • 4 weeks later...

wonder how deep the water came and how long it was sitting there for. We had a cruiser come into work which must had been sitting in water for a while, not good at all just about every electronic component was corroded, cost a sh1t load more to fix it up at cost price then he sold it for. would not recommend to anyone buying a car thats gone for a swim.

Yeah the swimming cars are bad.. however this one looks like its been washed. and doesnt appear to have had any water inside..

90k+ however.. and as said above if any electronics are dicked which this car is full of.. $$$$$$$

with water damaged cars its u and your luck really. mate and i bought an m3 water damage and we were going to part it out until it arrive at his door step, jumped in it and started and drove like any other m3, now its got rego and still driving around. but most water damaged cars are stat write-offs which is good for track cars

We have a passat here at work which came from QLD with water damage. The car wont start or run because it got water in the cylinders. It was funny telling the customer it needed a new motor worth 15k and that's just the beginning.

be interesting to see what the flood damaged 35 goes for. but as the other guys said buying flood damaged cars is a bit of a lucky dip. the odds start to stack against you a bit though when it's a car like the R35 that has a computer for bloody everything, if there is corrosion in the electronic components then it could get super nasty. you can remove some of that risk in older cars with more basic on board systems but in a 35 it's a big gamble.

be interesting to see what the flood damaged 35 goes for. but as the other guys said buying flood damaged cars is a bit of a lucky dip. the odds start to stack against you a bit though when it's a car like the R35 that has a computer for bloody everything, if there is corrosion in the electronic components then it could get super nasty. you can remove some of that risk in older cars with more basic on board systems but in a 35 it's a big gamble.

And even if it starts, there are time-bombs further down the track perhaps (via corrosion of electricals)?

how were the floods around sunshine in Vic? i know Qld was pretty bad.. but Vic wasnt televised as much..

it really doesnt look like most flood damaged cars i see.. i'll try get a price when it finishes and if its met reserve..

And even if it starts, there are time-bombs further down the track perhaps (via corrosion of electricals)?

yeah for sure. flood damage definitely doesn't cure itself over time! it gets worse if un-discovered and un-treated.

thanks angus smart, would be curious to see what it sells for.

how were the floods around sunshine in Vic? i know Qld was pretty bad.. but Vic wasnt televised as much..

it really doesnt look like most flood damaged cars i see.. i'll try get a price when it finishes and if its met reserve..

the floods wernt as bad as QLD but in some suburbs it reached car roofs.

but if the auctions found out the KM of the GTR then the electrics work, if not the car turns on too..

yeah for sure. flood damage definitely doesn't cure itself over time! it gets worse if un-discovered and un-treated.

thanks angus smart, would be curious to see what it sells for.

Wowzers

75,000 it made..

haha, have you found a way to transplant / set up the ADM head unit Chris? you might sort out the vin but when the japanese characters start popping up on the display you might raise a few eyebrows.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...