Jump to content
SAU Community

Recommended Posts

So today I parked the stagea on a gradient sloping to the left. I had about 1/4 tank of fuel left, and did notice that the gauge went right down to empty on the slope. No biggie, I thought to myself.

Well when I went to start the car again, it wouldnt start. It cranked but only the odd cylinder fired.

I had to roll the car in neutral onto flat ground before it would fire.

Normal? Just a quirk of the car?

Link to comment
https://www.sau.com.au/forums/topic/345735-dont-park-on-a-slope/
Share on other sites

Sadly....I to have had this problem...Lol...was more of a slope to the left though

Had to get me some fuel...Started then cut out....had to get him to push me backwards till i was on a diff angle so the fuel pump was covered again :/

Im getting the exact same problem on my driveway with a full tank of juice.. and sporadic.. took it for a two hour drive thursday night .. come home park on the drive , after refueling to a full tank... refuses to start. heaps of battery. Then i leave it for an hour play with the shifter .. finally starts in nuetral... Then starts again in park.

Then the following day.. refuses to start again.. full battery power lights are beaming.. im thinking shift lock or starter motor.. anyone else got any ideas?

did however notice it made a few slow spins of the starter when it did start like a dying battery or dying starter motor.. then the following day made clicks. now does nothing.

yeah shes a 2T brick where she sits.. need it towed ..starter motor is screwed.

Edited by PetroDola

It happened to me a lot. I either dont let it go below a quarter full or turn the car so its nose down!!! Took me three goes at running out of fuel before I got the hint that I really need to watch the tank though...

are you kidding? this happening on m35 too? God they fixed this sh!t on most cars in the 80s!

Not sure about the issues with starting it on the slope, but our fuel gauge can definitely respond poorly. I parked on the road outside my house last night for a few hours, trades people were on the drive way when I got home, when I went to move the car later that night the gauge had mysteriously dropped 25%.

are you kidding? this happening on m35 too? God they fixed this sh!t on most cars in the 80s!

no it was pure coincidence which happened to be on the steep drive..later realising my starter motor died .. didnt realise that nissan starters have a tendancy to just work then not work .. with no warning.. unlike other cars that generally give you slow turnover symptom similar to a battery dying.

Edited by PetroDola

I don't know if it would help, but I think if I had these issues when the tank got low I think I would check my cradle; see that it hadn't moved from where it's supposed to be, that the pump was mounted properly, check the actual level in the tank. 'Cause even when the level is really low, the cradle generally keeps enough around the pump to keep it submersed. And I know that even when you get the cradle out of the car, it's actually pretty difficult to empty that fuel OUT. So it should still be seeing some fuel...?

yep happened to me after work, just worked an 11 hour shift and that was the last thing i needed. The pick up must be on the drivers side cause my car was sloping toward the gutter and i had a quarter of a tank. It started but it soon died before i could take off. Pain in the arse

  • 4 weeks later...

slightly off the topic but to do with fuel gage part.

I notices that when I thrash it for a good ten minutes or so my fuel take gage drops about 20%. then as I go back to normal it slowly comes back up. could this be something to do with the G-force?(Even though there wouldnt be much at all with my fridge)

slightly off the topic but to do with fuel gage part.

I notices that when I thrash it for a good ten minutes or so my fuel take gage drops about 20%. then as I go back to normal it slowly comes back up. could this be something to do with the G-force?(Even though there wouldnt be much at all with my fridge)

Can't confirm, but been told the V35/M35 fuel gauge acts as a fuel consumption gauge too, so if you thrash it it'll say you have less but if you drive conservatively it'll give you more.

But this could be 100% wrong, just what I heard through a random stagea/nissan convo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The HG high flow is excellent, and costs about the $$ you're talking about. But it, and probably every other highflow, uses a diffeent core than the original turo, and the original Hitatchi core is quite long. So, I think it is inevitable that there is likely no such thing as a highflow that just "bolts on" with no other effort required. And the same is likely true for HG's outright replacement "bolt on" turbos (the ATR things). And the same is likely true for anything similar from elsewhere. I have no idea if the cheap Chinese/Taiwanese complete turbos from eBay/Temu/etc are as bolt on as they claim. I mean, they claim the bolt onto the NAs as well as the turbos, and we know that can't be "bolt on". But it wouldn't matter because I'm not buying a $169 4 psi turbo for anything other than a paddock basher.
    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...