Jump to content
SAU Community

Recommended Posts

the one with the most CCA, that will fit in the hole?

I don't know. Of all the batteries I've had, they all seemed to give out at different times, not in line with any quality / price. Obviously things like Gel and other fancy batteries might last longer. Kmart, get the terminals the right way round and the most CCA, and bobs your whatever.

Just get it done cause it will die at the worst time possible :rolleyes:

hey guys just wondering if anyone has an idea on the best battery to get for an M355 stagea. mine keeps going flat! i think its out of juice!

ATM I am using two Gel Baqtteries because it suits my FMIC piping. But yes CCA is the criteria. 500 + is what you need

You will need to change the terminals over if you get common style of battery. The M35 has small terminals which make it hard to source for. I think I got a 550 or 600cca in there.

thanks guys, needed to get the car running because my airbag light keeps flashing, my mate reckons that it has something to do with battery being drained?

so i just went so supercheap auto. grabbed a century one that looked like it would fit. all good so far. a

stupid airbag light

You will need to change the terminals over if you get common style of battery. The M35 has small terminals which make it hard to source for. I think I got a 550 or 600cca in there.

Nah, Independant Battery Distributors in Frankston stock a number of maintenance free batteries that bit perfectly... with 2 year guarantee :)

  • 7 months later...

Sorry to bring up an old thread, but does anyone who has replaced their battery have the size code? There's usually a letter and a couple of numbers on top of the battery but since mine is a Jap battery there's just random Japanese letters.

Just make it easier to order a replacement without hunting quite so much or changing terminals like Scott suggests.

Is 350Z the same?

Don't you just take it into Batteries-R-US & they pull out the correct size? That's what I did, but I'll get a code off mine in the morning if no one's replied before then.

I don't. Dad has a trade account with Independent Batteries, so I usually get him to order them for me.

If you've got a code that'd be great. Did you use the same terminals?

OK, not sure if this code will help but mine is a Supercharge battery, part # MF55B24L (CCA 430). I used the same leads but I remember now the earth lead was a fraction too big to clamp tightly with these stupid type that Nissan (all manufacturers?) use these days. I probably should have changed it but I wrapped a few turns of copper wire around the battery terminal instead lol.

I used a 530CCA European style battery, I had to modify the terminals so that the stock terminal clamps would fit (a piss easy job). It barely fitted in the hole, but looks stock now that it's in there

Just had a look at mine.

Platinum Power 2000 from Independent Battery Distributors.

Part #NS40LMF

380 CCA

RC60

Not a big battery, but have not had any issues for the past year or so... and it plugged straight in to the standard connectors.

  • 6 years later...

Right here is some digging:

Over in NZ they have a listing for an NS40L which is a 330CCA (if you get a beefy one it's about 380CCA).  I think this is the standard size.

Dimensions for this are: L = 187, W = 127, H = 220.  Terminals are 10mm (diameter??) and on the correct side.

The recommendation to upgrade in CCA size is the following:

NS60L (Exide part number X60CPMF, or 60CPMF, Century NS60LSX MF, or NS60LS MF)

This is a 450 or 480CCA battery with dimensions being: L = 237, W = 128, H = 222.  Terminals are the same as above

Interestingly, this is the same battery as a Nissan Tiida 2000-2006.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Unless you're fortunate enough to buy a newer car, getting an older style plate to match your name/car is difficult because they've already been purchased.  Unlike other countries, personalised plates are locked to the country and not region, so there can't be multiple versions of the same plate but with a different area code.  Hope that helps
    • People use the numbers to make it look like letters to spell words/names, which is where the illegal spacing comes in. For example this GR Yaris  
    • Today's rock removal from my stock pile out the back into a 4m³ skip bin, I still have a bit to go, hopefully there's enough room in the skip bin, it will be close My daughter and her boy was coming on Sunday to help, but, I got possessed by demons and started work as soon as the bin arrived at 1230 today Lots and lots of barrow loads were achieved  Currently I'm sitting on the lounge drinking beer thinking of how I should have waited till Sunday for some help, tomorrow will be a day off, in saying this, my day off will involve prep and paint of my alloy coolant and PS tanks with wrinkle paint (Jackie is in Sydney till Sunday so the home oven will get a run curing the paint....LOL)
    • That's why I said it is a meaningless term. Because there is more than one meaning that people can apply to it. When we said "highflow", that is exactly what we mean, and exactly what is done. In a highflow, they take your housing and machine them out to take bigger wheels, have a better internal profile, etc etc, and fit a new core with the different/better/bigger wheels.
    • Oh sry i do not know if i used the term right. What i meant is upgrade the internals and keep the housing. That is not "hybrid"? 
×
×
  • Create New...