Kando Dynamics Turbo

[Roy]

Rpm is a roller speed ratio that i have to input rpm It matches the log from the Nistune. When i get back to the shop i will take a pic with roadspeed

Why do u ask?

I just prefer road speed. Some prefer rpm but i look at road speed as i takes into account diff and tyres so better real world result in my eyes

And those saying go 10cm on a 2L i think you may make a peak number easier, it may even be a few kws higher; but the net result is terrible vs an 8cm on a 2l. Sure the RB20 is different to an SR20 but the result will be the same....no mid range and about the.same top end. If you are worried about.combustion effeciency and back pressure but in a slightly bigger.turbine or better flowing turbine in the same housing size. Seems that will give a better ovrrall result then putting too big a housing on a 2L

[DVS JEZ]

Will answer your email tonight sorry ive been under the pump. Is this enough for now? http://www.skylinesaustralia.com/forums/topic/344581-a-must-read-for-budding-tuners-or-those-interested-in-knock/page__view__findpost__p__5553569

Thank you.

Roy i will get it for u this arvo.

[slippylotion]

Thanks guys. Since I know have the 8cm we will give it a go and change to the 10cm if needed. Id like to keep the boost to a max of 20psi.

Scotty I'll be running a tial 38mm gate, unless I should go the 44mm? Havent bought one as yet. A mate Rex Kelway is making the high mount T3 external manifold for me in the next couple weeks.

Edited April 20, 2012 by slippylotion

[STATUS]

Thanks guys. Since I know have the 8cm we will give it a go and change to the 10cm if needed. Id like to keep the boost to a max of 20psi.

Scotty I'll be running a tial 38mm gate, unless I should go the 44mm? Havent bought one as yet. A mate Rex Kelway is making the high mount T3 external manifold for me in the next couple weeks.

stick with the 8cm like roy and i mentioned. Roy's explanantion is on the money.

[GTScotT]

Go the Tial 44mm, safe option and proven to work with the combo!

Ive thought a lot about getting a Kando with the T2 housing and hanging it off the housing. Could potentially work really well.

http://www.ebay.com.au/itm/Turbine-Housing-T67-25G-TD06SL2-20G-T25-Inlet-8cm-/290698119395?pt=AU_Car_Parts_Accessories&hash=item43aef548e3

[Aggroman]

Ror, Same. Isnt that why we are with them???

please dont tell my missus i said that. I like my balls attached

OH I AM SOO TELLING HER! your balls were already in her handbag though

[scotty nm35]

Thanks guys. Since I know have the 8cm we will give it a go and change to the 10cm if needed. Id like to keep the boost to a max of 20psi.

Scotty I'll be running a tial 38mm gate, unless I should go the 44mm? Havent bought one as yet. A mate Rex Kelway is making the high mount T3 external manifold for me in the next couple weeks.

I just prefer to go bigger, housing and gate. Less restriction is always better but there is of course that lag penalty. I have never driven a 300kw 2L but I can imagine it would come on late.

Split it and buy a 40mm Vband gate, realistically they should all work fine.

[slippylotion]

I just prefer to go bigger, housing and gate. Less restriction is always better but there is of course that lag penalty. I have never driven a 300kw 2L but I can imagine it would come on late.

Split it and buy a 40mm Vband gate, realistically they should all work fine.

It was making 270rwkw on 18psi on the old turbo set up. Full boost at 3800 and peak power at 7700rpm. Drives very nicely for a 4 banger, plenty of torque. Positive pressure from just under 2000rpm.

Ill give the 8cm a crack and maybe grab a 44 mm tial if I find one at a good price. Was thinking about a turbo smart 40 but they seem to be a heap dearer than a tial gate.

Edited April 20, 2012 by slippylotion

[DVS JEZ]

Here u go Roy, is this what u were expecting

[ARTZ]

heres what happens when VCT works Jez....

[Roy]

Here u go Roy, is this what u were expecting

Thats helps loads. Thanks. I am assuiming ts on 98? Is VCT on? A friend wants my TD06-20G when i take it off in a few weeks and trying to find some results to show him to give him a reliable feel for what he will be able to get out of it

[DVS JEZ]

Thats helps loads. Thanks. I am assuiming ts on 98? Is VCT on? A friend wants my TD06-20G when i take it off in a few weeks and trying to find some results to show him to give him a reliable feel for what he will be able to get out of it

Yes this has VTC on and is tuned on 98 octane fuel.

[SimonR32]

So I was on ebay and had a weak moment...

...Poncams should arrive later this week

[GTScotT]

So I was on ebay and had an EPIC moment...

...Poncams should arrive later this week

There. I fixed it.

[zebra]

400 on a DD or bust!

[34GeeTeeTee]

So I was on ebay and had a weak moment...

...Poncams should arrive later this week

Glad i am not the only one that did that

But the price!!! So cheap!!! Hard to say no.......

[Roy]

...Poncams should arrive later this week

256/8.5mm or 260/9.15mm???

This will be real interesting. Just remind me, do you currently have cam gears? Do a run before the cams go in and tune to get the latest and greatest run for reference. Or not....if its going to cost dollars or agro

[34GeeTeeTee]

Would be awesome to see the before and after difference... I've been searching and there is no real back to back comparisons i can find.....

I think the Type B 260's are the best for a Kando yeah? (I am only learning as i go and from what i have read they are best for Mid-large turbos??)

[SimonR32]

256/8.5mm or 260/9.15mm???

This will be real interesting. Just remind me, do you currently have cam gears? Do a run before the cams go in and tune to get the latest and greatest run for reference. Or not....if its going to cost dollars or agro

R33 RB25 only come in 256 8.5mm, I think you will find the 260 9.15mm are for the NEO solid lifter head.

I currently have an exhaust cam gear retarded 4deg, I'm under the assumption that with poncams 0 on both sides is the best so will most likely set and forget.

We have the before runs because nothing has really changed since the last tune, unfortunately it wont be a direct comparison because I'm also going from Nistune to Vipec (AFM to MAP) at the same time.

Hoping for a extra power everywhere above 4000rpm and maybe a tad extra down low

[SimonR32]

400 on a DD or bust!

haha I doubt it, Maybe 20-25rwkw not 40