Jump to content
SAU Community

Recommended Posts

Coz she was on the wrong side of the road blocking oncoming traffic.

I drive througfh there quite often in my truck, you'd be surprised how many people do this. At least they have the courtesy to get out of the way....

I see this type of idiocy every day, you learn to accept it and not worth the trouble most of the time...

Cab drivers are the best though, especially when someone puts their hand up on the footpath, cabbie comes in from the right lane pit stop styles!!!! Have come close to taking a few out over the years....

without watching it again isnt she on teh wrong side of the road because a truck is parked in her lane and she has no choice but to go around it? thus the truck should have waited and not been a cawk about it.

Yup, there is that too and by a truck no less.

That would have been very very nasty.

B doubles 60 tonnes loaded add the weight of truck and trailers together you have the best part of nearly 100 tonnes. no open casket if that had of happened.

without watching it again isnt she on teh wrong side of the road because a truck is parked in her lane and she has no choice but to go around it? thus the truck should have waited and not been a cawk about it.

also without watching it again it looked like she was going the wrong way down a one way street. Just what I saw anyway I could be wrong of course

without it again isnt she on teh wrong side of the road because a truck is parked in her lane and she has no choice but to go around it? thus the truck should have waited and not been a cawk about it.

Your wrong again, here's the deal.

The Linfox truck Is stationary at the set of lights waiting to turn into Victoria street. South auderley road is a two way street so the lady in the car for whatever reason has attempted to overtake the truck on the wrong side of the road. The Linfox truck is not parked or blocking the road, it's waiting for the green light to turn into Victoria street. So therefore the twit in the car is in the wrong and the b-double had every right to drive in the lane it did and should have not waited for the car to pass as it would have blocked Victoria street causing mayhem.

Hope that helps.

My arguement is, I see a LOT of truck drivers doing well over the 100 kmh speed limit; Yet their trucks apparently say "90 kmh speed restricted"? Some idiots need their licence taken away.

Im on the road day in day out for work as well, And even I've seen some pretty crazy shit.

You need to respect trucks on the road, Look at their tare weight. They are beasts on the road.

I take my hat off to the guy who recorded that. We need more drivers like HIM on the road, And not wankers who think a 40tonne truck is a sports car.

did just watch it again, looks to me as if linfox truck has hazards on maybe? not sure stopped a long way back from the line if he is wanting to turn.

either way doesnt change my opinion of truck drivers i could drive around with a camera mounted in my car and edit all the bits to show the awesome tailgating, intimidation, dangerous lane changes, rolling halfway through an intersection cos the light *will* change *eventually* or the not even bothering to stop when they most likely could have and yes sometimes they cant but really i dont think the road laws allow for "oh that light changed you were probably going to fast anyway to stop by the time its RED so thats ok just steam roll through" well after its red

haha so whats the answer to the question in the vid? How close was it really to the towtruck :P

Honestly didn't notice the tow truck till after i was across.

To me it wasn't close i even missed the gear and slowed down a little bit before booting it if you notice.

In the vid made it look a lot closer.

Funny thing was as soon as i saw this thread it made me thing of that exact thing making me go don't be on it. My luck >_<

Alex: The Linfox driver starts moving after Patrick has turned the corner.

My guess, allowing him enough room for the cut-in of the B trailer.

If you believe that you can do a better job driving trucks, then please, be my guest!

Patrick: What prime mover are you driving?

Alex: The Linfox driver starts moving after Patrick has turned the corner.

My guess, allowing him enough room for the cut-in of the B trailer.

If you believe that you can do a better job driving trucks, then please, be my guest!

Patrick: What prime mover are you driving?

if you referring to me, it aint me in the video. Just stumbled across it on the internet :)

Would be fun though haha

Honestly didn't notice the tow truck till after i was across.

To me it wasn't close i even missed the gear and slowed down a little bit before booting it if you notice.

In the vid made it look a lot closer.

Funny thing was as soon as i saw this thread it made me thing of that exact thing making me go don't be on it. My luck >_<

ahahahahah random as but funny lol

dont worry my L`s driving is heaps better xD

Alex: The Linfox driver starts moving after Patrick has turned the corner.

My guess, allowing him enough room for the cut-in of the B trailer.

If you believe that you can do a better job driving trucks, then please, be my guest!

Patrick: What prime mover are you driving?

I have no interest in a driving a truck what so ever, but dont try and tell me how bad all the other drivers are i watched a truck today on teh ring road push everyone out of its way as it was doing well over the speed limit and if someone didnt move he rode there bumper on those air brakes making a heap of noise until they moved not to mention the dodgy lane changing..

truck drivers calling other people bad drivers is an absolute joke!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...