Jump to content
SAU Community

Recommended Posts

Fitted nice white LEDs to cabin lights (standard) plus white LED strips to footwells both front & back.

Wired them to come on with door open (not running all the time) which gives a nice ambience when you first hop in.

You have to choose colour, brightness and method of operation carefully. It can be a fine line sometimes between classy and RICER :laugh: .

i was thinking of putting in red strips in the footwells (match the stock dials and doesn't affect night vision)

but i couldn't be bothered with the wiring (not the biggest fan of wiring)

which strips did you go with?

What catch cans are M35 owners running, and where are you mounting them?

I was looking at a nice Greddy one on eBay for around $100, looked like it should fit up against the battery enclosure?

Excuse what may seem like a dumb question but why do you run two catch cans? I understand the one to go between the intake and cam cover breather, I had one on my S14, but what's the other for?

Excuse what may seem like a dumb question but why do you run two catch cans? I understand the one to go between the intake and cam cover breather, I had one on my S14, but what's the other for?

Ones to stop oil going from the PCV into the intake and the other is to stop the breathers on the rocker's throwing oil through the FMIC.

Watch what size you get as there is sweet f#$k all room to fit em in.

Couple of pic's for locations.....these are from Cam's car.

post-37023-0-78879200-1303161489_thumb.jpg

post-37023-0-95091200-1303161553_thumb.jpg

post-37023-0-35605300-1303161681_thumb.png

Edited by Jetwreck

i was thinking of putting in red strips in the footwells (match the stock dials and doesn't affect night vision)

but i couldn't be bothered with the wiring (not the biggest fan of wiring)

which strips did you go with?

I don't know anyonewho likes wiring - just a means to an end I suppose :)

I got these ones off Flea-bay: http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=270721573963&ssPageName=STRK:MEWNX:IT

But don't believe the price as that has been changed. I paid $20 for 6 strips, including postage. I also put 2 in the back (inset into the grab handles) that also work when interior light is on.

Red strips would look pretty cool, especially if they match other lights. My white ones are just to aid getting in/out or finding stuff in the back, not to be all all the time. I am going with different ambient lighting for night driving but I've not finished deciding on colour or location yet.

Ones to stop oil going from the PCV into the intake and the other is to stop the breathers on the rocker's throwing oil through the FMIC.

Watch what size you get as there is sweet f#$k all room to fit em in.

Couple of pic's for locations.....these are from Cam's car.

That's really strange. :/

PCV is short for? I'm just trying to get my head around this...

Why would they run what seems to be two sepparate breathers for the engine...

Do both put oil back through the intake/cooler?

Does any one have any pic of the locations where the catch cat lines go to, not the catch can location.

Cheers.

That's really strange. :/

PCV is short for? I'm just trying to get my head around this...

Why would they run what seems to be two sepparate breathers for the engine...

Do both put oil back through the intake/cooler?

Does any one have any pic of the locations where the catch cat lines go to, not the catch can location.

Cheers.

bit of a messy engine bay but it show's the PCV side....the rocker locations are a little harder to shoot but it runs into the back of the suction pipe.

post-37023-0-62594600-1303163573_thumb.png

Edited by Jetwreck

I guess the question which hasn't been asked is:

How much oil do your catch cans collect?

Do you drain them back to the sump?

At oil change as I only have the PVC one atm probably about 100ml's....my motor only has 47,000km's on it too!.....the other side is probably about the same!

An no I don't drain em back into the sump....I just collect and clean at service interval's.

I guess the question which hasn't been asked is:

How much oil do your catch cans collect?

Do you drain them back to the sump?

No, You drain it each time you do an oil change and I usually have around 1 - 1.5 inches of oil collected in the catch can.

The breather on the other bank sits directly below the intake resonator pipe that is in the upper right corner (black pipe) of Jetwrecks photo. This breather is quite a large diameter pipe which makes it a little tricky to match up to a smaller size catch can.

Ones to stop oil going from the PCV into the intake and the other is to stop the breathers on the rocker's throwing oil through the FMIC.

Watch what size you get as there is sweet f#$k all room to fit em in.

Couple of pic's for locations.....these are from Cam's car.

Actually, I don't have the one in the battery compartment.

I found that it didn't catch anything and I still have not yet installed the larger one under the airbox :blush:

No, You drain it each time you do an oil change and I usually have around 1 - 1.5 inches of oil collected in the catch can.

Yep, about the same as mine, although I drain about 25mm every 10,000kms (my service intervals).

Doesn't seem to make much difference how "experienced" your engine is either...

Cool. Thanks for the responses!

Means I'm not going to worry about it :whistling:

Pull apart your intake and have a look. Mine was full of gunk when I looked the other day, so I'm definitely going to. Just means I'll have to measure up and make sure I can fit it first.

Edited by bigkevracer

I was amazed how oily my intercooler was and I knew it wasnt working as well covered in oil. The breather catch can doesnt seem to catch much oil though, but heaps of water and ethanol vapour. The pcv definitely dumps oil down the middle two plenum runners, I have about the same 100ml going in each change, more in winter with the water condensate. I have fitted a ball valve on each to drain into the oil tray when doing the change.

well today i packed the stagea down with 2 eskys, a few casrtons of beer, a bunch of kids toys and my boat.

and the boat is packed down with all the ski gear, 140 litres of fuel, tents and camping crap.

time for a relaxing weekend wakeboarding at a lake just outside of Mildura :thumbsup:

DSC01390.jpg

well today i packed the stagea down with 2 eskys, a few casrtons of beer, a bunch of kids toys and my boat.

and the boat is packed down with all the ski gear, 140 litres of fuel, tents and camping crap.

time for a relaxing weekend wakeboarding at a lake just outside of Mildura :thumbsup:

DSC01390.jpg

Nice boat's!!!! :P

Have a great one....what size motor you got on the boat?

Edited by Jetwreck

well today i packed the stagea down with 2 eskys, a few casrtons of beer, a bunch of kids toys and my boat.

and the boat is packed down with all the ski gear, 140 litres of fuel, tents and camping crap.

time for a relaxing weekend wakeboarding at a lake just outside of Mildura :thumbsup:

mmm... Stag looks great, sounds like an awesome weekend.

Colour me green :action-smiley-069:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
×
×
  • Create New...