Jump to content
SAU Community

Recommended Posts

with that hi-res factory screen, blu-rays will look great :P

just remember if you want to utilise your factory screen, your head unit needs to be able to output NTSC. should have no problems with that tho

I know, but if i want to watch a movie i only have on bluray, id be happy with the factory screen!

Brad told me about the ntsc issue, thats the only thing im worried about with the clarion but should be ok. I hope!

Installed wideband controller & extended display behind custom perspex face in vent. Logs heaps of stuff, including G-forces. Could be interesting to do before & after swaybar install.

post-76144-0-71872800-1306492877_thumb.jpg

That looks really, really good! That would look pretty factory to prying eyes, which is what I love the most about it.

Installed wideband controller & extended display behind custom perspex face in vent. Logs heaps of stuff, including G-forces. Could be interesting to do before & after swaybar install.

post-76144-0-71872800-1306492877_thumb.jpg

That does look good. What brand is it?

Mine sticks out like a sore thumb :ermm:

That looks really, really good! That would look pretty factory to prying eyes, which is what I love the most about it.

Thanks, that's what I like about it too. I spend lots of time searching/reading to try to find the product right for me. Keeping gauges hidden or integrated as much as possible is a pet project of mine. I've kept the factory vent so it can be returned to normal in a matter of minutes if I was to sell & new owner didn't like it. Initially I was going to cut out a section of the vent but couldn't work out how to do it neatly enough. I softened the perspex in the oven & curved it slightly to fit the shape of the dash then masked where the display would show through & painted the rest matt black. It's almost un-noticeable when car is off/locked up.

That does look good. What brand is it?

Mine sticks out like a sore thumb :ermm:

It's from 14point7.com & I bought the new SLC DIY2 because I like to DIY everything if possible (just my thing :rolleyes: ) & in this case all you need to finish is the connectors on the cables as the unit is complete, ie no components to solder. But in hindsight I should have bought the full spec unit because it has a built in memory to store data without having to have a laptop connected when driving. The main reasons I went this way are:

1) The display could be remote mounted - I bought some connectors & ribbon cable from Jaycar for <$5

2) It logs AFR, RPM, Boost (I bought an extra sensor) & either 2 x G-force readings from built in accelerometers or one/both can be changed to 0-5V analog inputs, so I'm logging throttle & AFM. It also records battery voltage & O2 sensor temperature by default. Heaps of extra sensors are available to purchase.

3) It has a simulated narrowband output. I cut the O2 sensor wire at the ECU & fed this output inplace of it. Now I can make overall changes to the AFR, ie leaner, & finetune other load points with a simple interceptor to enrich mixtures where required. My belief is, & it is untested as yet, that this setup won't give me the ignition timing issues to the same extent as using an interceptor alone.

DIY Rocks.

I arranged for some gutter rash along my LHS wheels today driving to work. Was going at speed limit, but thought I would corner at the speed limit too. Clipped a gutter getting the apex. Usually the 1600 would just lift a wheel, but this was a little bit more 'bangy'. Only a little bit of rash :blush:

DIY Rocks.

I arranged for some gutter rash along my LHS wheels today driving to work. Was going at speed limit, but thought I would corner at the speed limit too. Clipped a gutter getting the apex. Usually the 1600 would just lift a wheel, but this was a little bit more 'bangy'. Only a little bit of rash :blush:

Not the AXIS rims!pinch.gif

Cornering at (or above) the speed limit is possible; see my sig :whistling:

If you're quick, I may be able to help you...

Not the AXIS rims!pinch.gif

Cornering at (or above) the speed limit is possible; see my sig :whistling:

If you're quick, I may be able to help you...

Yes the Axis rims! (Damn it!)

I think I already have updated sway bars fitted from Japan. The car sits nice and flat.

Pity the owner doesn't realise how PHAT the M35 is... :happy:

Yes the Axis rims! (Damn it!)

I think I already have updated sway bars fitted from Japan. The car sits nice and flat.

Pity the owner doesn't realise how PHAT the M35 is... :happy:

If they're a goldy powdercoat, then yes. Freeway Dolphins.

Thanks, that's what I like about it too. I spend lots of time searching/reading to try to find the product right for me. Keeping gauges hidden or integrated as much as possible is a pet project of mine. I've kept the factory vent so it can be returned to normal in a matter of minutes if I was to sell & new owner didn't like it. Initially I was going to cut out a section of the vent but couldn't work out how to do it neatly enough. I softened the perspex in the oven & curved it slightly to fit the shape of the dash then masked where the display would show through & painted the rest matt black. It's almost un-noticeable when car is off/locked up.

It's from 14point7.com & I bought the new SLC DIY2 because I like to DIY everything if possible (just my thing :rolleyes: ) & in this case all you need to finish is the connectors on the cables as the unit is complete, ie no components to solder. But in hindsight I should have bought the full spec unit because it has a built in memory to store data without having to have a laptop connected when driving. The main reasons I went this way are:

1) The display could be remote mounted - I bought some connectors & ribbon cable from Jaycar for <$5

2) It logs AFR, RPM, Boost (I bought an extra sensor) & either 2 x G-force readings from built in accelerometers or one/both can be changed to 0-5V analog inputs, so I'm logging throttle & AFM. It also records battery voltage & O2 sensor temperature by default. Heaps of extra sensors are available to purchase.

3) It has a simulated narrowband output. I cut the O2 sensor wire at the ECU & fed this output inplace of it. Now I can make overall changes to the AFR, ie leaner, & finetune other load points with a simple interceptor to enrich mixtures where required. My belief is, & it is untested as yet, that this setup won't give me the ignition timing issues to the same extent as using an interceptor alone.

i've been thinking about getting one of those for ages now

i was going to get the original diy one last year but never got around to it, then they brought out the diy2 so i was thinking of getting that but then i thought that i would have too many gauges and things in the car

maybe i'll still get one and put it in any way

wanna do a writeup?

wanna do a writeup?

I might do one once I sort out some niggly things. For instance, my unit doesn't recognise the RPM input I'm feeding it, but I can get a reading on my DMM on the frequency setting. I've only just started playing with it so maybe will have it going properly in a few days.

I might do one once I sort out some niggly things. For instance, my unit doesn't recognise the RPM input I'm feeding it, but I can get a reading on my DMM on the frequency setting. I've only just started playing with it so maybe will have it going properly in a few days.

i like the look of their fuel adjuster too

i'm thinking that plus the wideband could let me get some better fuel consumption and a bit more power

My Greddy catch can turned up today! :D

Going to be a big weekend for the Stag. Hopefully will fit the sway bars, adjustable rear toe arms, plenum spacer and catch can.

Wait and see when Brad is available to give me a hand fitting the new stereo, and hopefully HDTV tuner. Fingers crossed the stereo will work with the NTSC screen!

Once the catch can is in, have to organise the HDI intercooler finally. Held off until I had the catch can, because I didn't want to immediately fill it with poo!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...