Jump to content
SAU Community

Recommended Posts

Headrests are not that hard to put in. Like Ryan said you need patience. I fed a banana shaped bit of wire down the back of the seat. Some times you get it first go other times I just want to throw tools. And if you unzip the seats and undo the plastic lip at the bottomm its a bitch to get back together.

Are these cloth seats you are talking about? I wonder if they're different to the leather?

I unzipped my leather one (drivers side) to add a piece of foam to give me some more lumber support lower down. Then just zipped it back up. Yeah it was "tight", but not what I'd call difficult.

Are these cloth seats you are talking about? I wonder if they're different to the leather?

I unzipped my leather one (drivers side) to add a piece of foam to give me some more lumber support lower down. Then just zipped it back up. Yeah it was "tight", but not what I'd call difficult.

thats a great idea! my seat needs more lumbar support too!!

thats a great idea! my seat needs more lumbar support too!!

Easy to do. I used some hardish stuff that came wrapped around equipment - not polystyrene, but that would do I guess, just potentially messy. I put it behind the frame/webbing at the back which in turn pushed the front out. I find the lumber adjustment via the lever to be OK, but a little too high on my back to be effective on long drives.

Edited by Commsman

Woooooo! :thumbsup: Now you need to paint your lights black! I have a spare light if you need a practice unit.

Fark! Can it take any more black?:ph34r:

Might need you to give me a tutorial as well... :whistling:

Are these cloth seats you are talking about? I wonder if they're different to the leather?

I unzipped my leather one (drivers side) to add a piece of foam to give me some more lumber support lower down. Then just zipped it back up. Yeah it was "tight", but not what I'd call difficult.

Yes they were cloth seats and the zip goes down the back and around the bottom. I think the plastic lip has to be undone to get to the zipper.

agreed....might look abit "too much" on a dark coloured car?

I've always wondered what other colours might look like. Red or yellow perhaps. There's millions of colours so you are almost guaranteed of being unique, plus it's paint so you could change it often for a new look.

Or not pinch.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...