Jump to content
SAU Community

Recommended Posts

Far Queue. I backed the R30 into the 25G. But I am lucky. The front guard I hit is the one with the rust hole in it and I have a spare guard, so no drama. But I have buggered the R30 rear bar.

Win some, loose some.

I believe I'm expecting a photo of my Stagea in the mail from my good friends at SAPOL. >_<

Ouch... :(

make sure you credit the photographer if you use it anywhere :P

LOL. That, or stock up on protein shake mix, depending on what side you're fighting for.

LOL. That, or stock up on protein shake mix, depending on what side you're fighting for.

should i have it before bed??

craig are you going to make it one piece? or have 3 seperate ones like your template?

Don't you want some droop? It forces the wheels to maintain contact with the road when you go over a bump. Having too much droop is bad as this will force the car to raise when cornering too much (dependant on spring rates/shock rates etc.)

Yeah, I should clarify; as little droop as these shocks allow; which is still around 4ish inches.

I agree with you regarding droop helping handling but with the length of these shocks, I was actually more concerned about getting the shock running resonably central in it's stroke to allow a good amount of compression travel without bottoming out the piston assembly.

should i have it before bed??

craig are you going to make it one piece? or have 3 seperate ones like your template?

1 piece.......I will need to test fit on your car as well though to make sure that the one I do fits all.

Edited by Jetwreck

1 piece.......I will need to test fit on your car as well though to make sure that the one I do fits all.

ide be very interested as mine flung off on the freeway some time ago,

i can arrange that. we should just go to the workshop every wednesday night. we have been there pretty much every week for a month lol

I agree....I should be there the following 2 Wednesday nights anyway! Makes it easy to check over things.

ide be very interested as mine flung off on the freeway some time ago,

I have a spare lying around, but it might be worth waiting to see Craig's "quick release" design.

1 piece.......I will need to test fit on your car as well though to make sure that the one I do fits all.

It won't fit "all" :(

EDIT: fixed thanks Aaron :blush:

Edited by iamhe77

It won't fit "all" :(

I have a spare lying around, but it might be worth waiting to see Craig's "quick release" design.

oh as in yours lol you mixed the quotes around i think.

yeh Ill wait for craigs one..if it doesnt im gonna leave it, its alot easier doing a service, a quick release would be nice though

i think a large opening under the sump would be ideal. that way you could leave the rest of the undertray in position

yeh but i cant remember how the stock one is, isnt there a metal bit around the drain "hole"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...