Jump to content
SAU Community

Recommended Posts

I think the reference was to some probs you had that could be attributed to less than ideal maintenance before you owned it.

Correct me if I'm wrong, but things like banjo bolt blocked (first turbo failure?) and the sludge you found when you pulled your oil filter/associated mounting hardware off. Chances are a few oil changes might have been missed pinch.gif .

it was probably me more than anything. when i bought it i never serviced it properly. used el cheapo oils and stuff.. when I came on here I started looking after it..

What about your tranny? Or was that your own doing? RVO said it was pretty trashed...LOL :whistling:

nope? he said that for the amount of K's that the car had done it seem like it was pretty spot on.. he said your pan must have been dropped and changed..and thats why it looked like it was in good nick.. with the previous owner your car had, i wouldnt talk buddy :ph34r: i know a lot more about your car than you think..

just sayin lol

bahhhhaaahhhaaa!!

Jaffa sledge time!!!

lol craig arent Jaffas red? should start calling you a mars bar..

What the hell is he doing trashing his tranny? Is that what the young kids are calling it now?whistling.gif

lol yeh join in the fun dale..

lol yeh join in the fun dale..

You sell one Stagea, and look what happens...tongue.gif

Sorry dude; I just couldn't resist.

200 is good? I take it you got your electrical issues sorted & retune done?

You sell one Stagea, and look what happens...tongue.gif

Sorry dude; I just couldn't resist.

200 is good? I take it you got your electrical issues sorted & retune done?

200 is running ok now.

all the electrical stuff is sorted $300 later.

got scott to weld me up a suction pipe for the stock s15 airbox and z32 AFM. perfect

put a new front mount return flow cooler in, which is proving to be better than the massive Greddy one.

standard s15 BOV with grub screw so no more fully sick dosing..thank f**k.

all I wanna get now is a new fuel reg, as the one i have now is malpassi rising rate(a piece of shit)

then i'll head up to cihan for a tune..if i hit over 200kw ill be happy. this has tooooo much response as it is.. ass goes out 2nd and 3rd in the dry.. quite fun.

Good stuff.thumbsup.gif

Back on topic, I cut the centre bar out of the opening of my Aero front bar; I think it looks better (too late anyway) but it was a breeze with my new cheapy Ozito multi-function tool.

The ones that have an oscillating (as opposed to rotating) blade; put the blade against your hand; big vibes, no cut. On a plastic bumper, it just pushes through literally like a hot knife through butter. Very neat, no burning or melting of the plastic, but no monster furry edges like a hacksaw or jigsaw cut.

Still dragging my feet about the mesh; everyone else seems to like it but me!whistling.gif

post-61153-0-51355100-1318457650_thumb.jpg

Got new tires and drove it to 200,000kms, like a boss.

317512_10150358106798024_785208023_8233698_551841096_n.jpg

Sorry for the off topic but? 576.6km and still 1/4 tank of fuel :O. Is the m35 really that much better on fuel?

Good stuff.thumbsup.gif

Back on topic, I cut the centre bar out of the opening of my Aero front bar; I think it looks better (too late anyway) but it was a breeze with my new cheapy Ozito multi-function tool.

The ones that have an oscillating (as opposed to rotating) blade; put the blade against your hand; big vibes, no cut. On a plastic bumper, it just pushes through literally like a hot knife through butter. Very neat, no burning or melting of the plastic, but no monster furry edges like a hacksaw or jigsaw cut.

Still dragging my feet about the mesh; everyone else seems to like it but me!whistling.gif

post-61153-0-51355100-1318457650_thumb.jpg

i like the bigger mesh leb mesh looks too cheap

Sorry for the off topic but? 576.6km and still 1/4 tank of fuel :O. Is the m35 really that much better on fuel?

from memory I think his car is a VQ25DD.....regardless on the Fwy I get in between 650km and 700km to a tank providing I don't hit it.....with the VQ25DET......around town they tend to be a little shit before getting a tune!

i like the bigger mesh leb mesh looks too cheap

Yep, I think the hexagonal mesh I've got will be better with a big cooler behind it; but for the next few weeks, I'll be sticking with the Uleh bro.whistling.gif

At least it isn't blue...pinch.gif

Yep, I think the hexagonal mesh I've got will be better with a big cooler behind it; but for the next few weeks, I'll be sticking with the Uleh bro.whistling.gif

At least it isn't blue...pinch.gif

hexagontal mesh is the standard stuff yeh?

Good stuff.thumbsup.gif

Back on topic, I cut the centre bar out of the opening of my Aero front bar; I think it looks better (too late anyway) but it was a breeze with my new cheapy Ozito multi-function tool.

The ones that have an oscillating (as opposed to rotating) blade; put the blade against your hand; big vibes, no cut. On a plastic bumper, it just pushes through literally like a hot knife through butter. Very neat, no burning or melting of the plastic, but no monster furry edges like a hacksaw or jigsaw cut.

Still dragging my feet about the mesh; everyone else seems to like it but me!whistling.gif

Aero looks good black and without the foggies IMO! Not much of a fan of it normally.

Mesh needs more black I reckon.

A close up of how the stuff I got from Autobarn (I think it's Monza??) looks behind my front bar.

IMG_2549r.jpg

IMG_2550r.jpg

Aero looks good black and without the foggies IMO! Not much of a fan of it normally.

Mesh needs more black I reckon.

A close up of how the stuff I got from Autobarn (I think it's Monza??) looks behind my front bar.

IMG_2549r.jpg

IMG_2550r.jpg

mesh does look good......pity about the gay pascal metallic blue colour around it!

hexagontal mesh is the standard stuff yeh?

Yes, I think the OEM is diamond mesh though. Mine didn't come with it, and given the pissing about I had to go through just to get the blanking plates; didn't even bother.down.gif

Aero looks good black and without the foggies IMO! Not much of a fan of it normally.

Mesh needs more black I reckon.

A close up of how the stuff I got from Autobarn (I think it's Monza??) looks behind my front bar.

IMG_2549r.jpg

IMG_2550r.jpg

Cam, lol, it is black, just the way the light is hitting it. whistling.gif I'm actually quite happy with the look of the Blanking Plates versus the Spotties myself.thumbsup.gif

Looks to be exactly the same thing; mine was SAAS, but same difference. The stuff I have to replace it is slightly smaller openings than the OEM and hexagonal in form.

And I'll have enough left over for another car. I'm also convinced the Aero cools better than the smiley face front; Win!

Edited by Daleo

mesh does look good......pity about the gay pascal metallic blue colour around it!

LOL, you just can't help it can ya!

Cam, lol, it is black, just the way the light is hitting it. whistling.gif I'm actually quite happy with the look of the Blanking Plates versus the Spotties myself.thumbsup.gif

Looks to be exactly the same thing; mine was SAAS, but same difference. The stuff I have to replace it is slightly smaller openings than the OEM and hexagonal in form.

And I'll have enough left over for another car. I'm also convinced the Aero cools better than the smiley face front; Win!

Fair enough. The way that light is hitting it, the mesh almost looks like the silver version.

Aero definitely lets more air through than the standard RS bumper, no doubt about it.

Interested to see your replacement mesh :)

nope? he said that for the amount of K's that the car had done it seem like it was pretty spot on.. he said your pan must have been dropped and changed..and thats why it looked like it was in good nick.. with the previous owner your car had, i wouldnt talk buddy :ph34r: i know a lot more about your car than you think..

Well go on!! The suspense is killing me...go ahead and tell me what dimi did to it...

Well go on!! The suspense is killing me...go ahead and tell me what dimi did to it...

hook, line...

annndd..

wait i'll just let the suspense get to you with that last one.nyaanyaa.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...