Jump to content
SAU Community

Recommended Posts

+1 pm with price if you want.

And maybe a drum of 3000 for the daily too.

I can get a price for that, I'm possibly going to get one of that too; I reckon it might be a bit over $100.

Cool. Is that from a chain parts store at retail or a trade only supplier?

Their head office is not far from me; so it was at their main warehouse.

I'm sure you'll be able to get them from an oil wholesaler though.

I got the passenger seat fitted today and cleaned the interior quickly, it's got to look its best for the dyno tomorrow. :)

Also a pic of the stock looking engine bay. The cover makes a difference.

post-63525-0-13029200-1340960126_thumb.jpg

post-63525-0-75568300-1340960143_thumb.jpg

I got the passenger seat fitted today and cleaned the interior quickly, it's got to look its best for the dyno tomorrow. :)

Also a pic of the stock looking engine bay. The cover makes a difference.

Looks comfy in there mate!

Some black silicone joiners, some satin black paint; factory spec.

Also a pic of the stock looking engine bay. The cover makes a difference.

I never found the engine cover fitted particularly well once the spacer was in - did you put some risers on the front bolts or just encourage it to bend a little to get some purchase on them?

This weeks Stagea related activity appears to have been borking my turbo. :(

Seems last weekend's cruise was a bit too much. Weird; because I was taking it easy too...

Onward & upward eh? :whistling:

This weeks Stagea related activity appears to have been borking my turbo. :(

Seems last weekend's cruise was a bit too much. Weird; because I was taking it easy too...

Onward & upward eh? :whistling:

What's the plan then? Hypergear?

If only you had somewhere you could take it to do the turbo work for you... :whistling:

This weeks Stagea related activity appears to have been borking my turbo. :(

Seems last weekend's cruise was a bit too much. Weird; because I was taking it easy too...

Onward & upward eh? :whistling:

Sounding a bit suspect is it mate?

I never found the engine cover fitted particularly well once the spacer was in - did you put some risers on the front bolts or just encourage it to bend a little to get some purchase on them?

I ditched the spacer. ;)

This weeks Stagea related activity appears to have been borking my turbo. :(

Seems last weekend's cruise was a bit too much. Weird; because I was taking it easy too...

Onward & upward eh? :whistling:

Ouch, How big are you going?

Whatever you do, dont go to that Stagea HKS bro garage joint. (heard bad things). lol.

What's the plan then? Hypergear?

If only you had somewhere you could take it to do the turbo work for you... :whistling:

Probably not; been talking with Craig, and I'll be going with something that he's recommending.

He's driven a lot of different combinations, built by a bunch of turbo builders; so I trust his judgement.

Sounding a bit suspect is it mate?

It has a very strange whine emanating from it now; and that's in addition to the standard whine.

Still boosting fine, and doesn't seem to be rubbing; but who know's how long that will last.

Ouch, How big are you going?

Whatever you do, dont go to that Stagea HKS bro garage joint. (heard bad things). lol.

Had to happen eventually; I reckon it's been living borrowed time for a while now. I'm currently at 103,000km (plus whatever the mandatory haircut adds) so it's done ok.

Unfortunately, I don't think I'll be joining the powah war. :/

I really want to keep the response close to the stocker; so it's going to be small.

The cruise the other night just reinforced to me that I don't want a lagmaster; it's really nice with the handling it has, it's devastating point to point on a windy road.

I don't want to lose that; I just want to have the really good midrange of the stocker with maybe a bit of potential down the track for a handful of extra KW's IF I choose to go a bit more boost and aftermarket management.

That's still a way down the track (if at all) and I don't want to regret going too big in the interim.

I have a 170rwhp, 300km/h bike that makes any car look stupid (does 164km/h in first gear), so I don't need the car for my speed fix.

I've heard bad things about that workshop too; have you seen the bloke who runs it? :P

Edited by Daleo

I really want to keep the response close to the stocker; so it's going to be small.

The cruise the other night just reinforced to me that I don't want a lagmaster; it's really nice with the handling it has, it's devastating point to point on a windy road.

I don't want to lose that;

YES! I agree Dale :thumbsup: (but you already knew that, lol).

just a suggestion i had a strange whinning noise that i thought was the turbo lacking oil on startup would last a little while and then go away. it was like a nasty queeling noise and eventually i traced it down to the belts on the front of the motor needed some dry lube, WD40 done jack sh*t but helped me find it as its not easy to get ur hand past the clutch fan to lube it up.

dont know if this helps but anythings worth a shot!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...