Jump to content
SAU Community

Recommended Posts

I hope so, if Craig is still speaking to me after the 11ty billion phone calls in the last week or so...

Fitted that insert yet?

lol understandable from craigs side :P

yup installed it last weekend. its a little rough, i think it needs tightening. i cross threaded the bolt :( lucky i have a full set of taps, fixed it right up, but dont think it tapped the thread far enough.

only took about 30 mins, including running the car up the gutter without smashing the front bar to pieces lol

:nyaanyaa:

lol understandable from craigs side :P

yup installed it last weekend. its a little rough, i think it needs tightening. i cross threaded the bolt :( lucky i have a full set of taps, fixed it right up, but dont think it tapped the thread far enough.

only took about 30 mins, including running the car up the gutter without smashing the front bar to pieces lol

Lol, yeah I know... :closedeyes:

Bit of a bugger about the bolt, let me know if you need a hand sorting it out.

Did it make the difference you were hoping for?

If you'd smashed the front bar; you could've had a matching pair... :nyaanyaa:

Bedded in a new set of Remsa pads from GSL Rallysport yesterday; if you're in the market for some performance pads, these are well worth looking at!

Oh; my turbo went out with a whimper today, here's hoping John at Precision finishes the new one early next week.

Looks like I'm on the bike for the next little bit (cue some rainy weather).

On the upside my new Quickshifter (on the bike) is finally working properly!

Edited by Daleo

On the upside my new Quickshifter (on the bike) is finally working properly!

Nice, care to throw the keys over this way? ;)

I finished getting my track whale prepared today, new tow strap fitted, fire extinguisher installed, quick road tune tonight and she is ready for PI.

Damn it pulls hard now, the tune was way out running 14.5:1 on boost for some reason, perhaps there was a boost leak before? The only thing I did was to make up a new rear muffler, I can't imagine it would have had that much effect. I would guess I picked up at least 40kw by my butt dyno, awd skids tomorrow. :)

Nice, care to throw the keys over this way? ;)

I finished getting my track whale prepared today, new tow strap fitted, fire extinguisher installed, quick road tune tonight and she is ready for PI.

Damn it pulls hard now, the tune was way out running 14.5:1 on boost for some reason, perhaps there was a boost leak before? The only thing I did was to make up a new rear muffler, I can't imagine it would have had that much effect. I would guess I picked up at least 40kw by my butt dyno, awd skids tomorrow. :)

Lol, no worries, didn't know you rode mate; a bit different to the whale. ;)

Lol @ butt dyno, can't argue with another 40 arsepowers! I think mine only has about 40hp ATM...

When are you at PI?

Edited by Daleo

I have to get up at 5am tomorrow to head down, its the WRX event but 30 Nissans are going to gatecrash. I'm just down for Novice class to see how the car goes and learn some lines off the pro's.

I have ridden over 300,000ks on road bikes over the years, 140 of that on a GSXR750, I even rode it to Brisbane and back. Sounded like a good idea at the time... :)

I have to get up at 5am tomorrow to head down, its the WRX event but 30 Nissans are going to gatecrash. I'm just down for Novice class to see how the car goes and learn some lines off the pro's.

I have ridden over 300,000ks on road bikes over the years, 140 of that on a GSXR750, I even rode it to Brisbane and back. Sounded like a good idea at the time... :)

Good luck, hope all goes well, and you eat some Wrexies; you should have fun.

I had a '97 GSXR750 (first of the fuel injected ones); loved that bike. :D

The K6 Thou is a hell of a thing though, and the Quickshifter is brilliant. Over the crest at the end of the straight at PI at 275km/h (admittedly on the limiter) in FOURTH gear. You know you're alive then.

Edited by Daleo

Just finished packing, managed to fit it all in with the seats down. Half my shed is in there... Track rims, 4 jerrys of e85, two helmets and a full toolkit.

I had the 96 Dale, last of the good ol carbs. I tuned it myself, and managed to hit 280 on the straight at Sandown. I love that feeling, a little too much, which is why I had to give bikes away.

For now, dont tell the missus... :whistling:

So... New radiator has arrived, Nismo mounts are in, engine is painted, GReddy suction kit and z32 afms are in, exhaust manifolds are on, coolant leak from block is fixed... Just waiting on a new BOV, and it's off to Spry for another tune.

Hopefully in the meantime the plug cover and oil cap arrive.

After that, it's wiring tidy up, repaint wheels and brakes, then hopefully happy motoring until the radiator pops again in another 2 years...

Well in 2 weeks ill be taking the m35 on a roadtrip to eastern creek for the world time attack championships so got a few things that I need to fix beforehand and while I was at it fix a few things that have been annoying me. Got a incabin filter, fuel cap bumpers and left and right cam cover gaskets as the turboside is seeping onto turbo heatsheild (common problem.) Im just getting both done as plenum will be off anyway.

This was way more effort, stress and money than it should have been, but finally got it changed over... I never want to do that again!

IMG_1367.jpg

Still waiting to get my cat-back in and dale's brace when it comes.

Next on my list is new brakes and probably the HDI inter-cooler, dump, front pipe etc etc etc haha... if only money grew on trees :closedeyes:

Edited by NickM91

Started the Turbo removal today; fortunately I have access to a hoist, gearbox jack, and a bunch of workshop tools.

Also handy to have Craig to phone and laugh at my misfortune; as he knows well the fun I'm having. :whistling:

Need to buy/make a couple of tools tomorrow, but so far it hasn't been too terrible; but I'm not going anywhere near the pace that Scotty & Craig can do. There's no point busting my arse, as the other work going on will delay reassembly anyway.

The source of the incredible racket and snails pace performance; post-61153-0-66876300-1343214343_thumb.jpg

No aluminium filings in the turbo to cooler pipework, so that saves on cleaning.

Headed out this afternoon to pick up the high flowed turbo, looks great; measurements and pics tomorrow.

Also getting rid of the thermal wrapping, and going for some sexy ceramic coatings on my Dump and Mid pipe.

post-61153-0-18172900-1343214861_thumb.jpgpost-61153-0-87298300-1343214876_thumb.jpg

It works fine, but it's going a bit fluffy on the underside; and hey, while it's all apart...

Anyway, I've beadblasted both pipes, the dump pipe inside and out, as it's getting a heat reflective coating on the inside and an insulative coating on the outside.

The exhaust housing of the turbo will be getting the same treatment as the dump, and this should net a 30% temperature reduction over bare metal.

It should also keep spool times up due to the retained heat in the exhaust gas which keeps gas velocity high.

Pics of the coated parts once they're done.

Yeah, lightened for extra performance! Not. You wouldn't believe the racket it makes when I had to drive it.

Coolant lines and oil drain; pretty easy, oil feed still in place ATM.

Feelin' your pain Dale. :unsure:

Putting off my 2nd removal - just don't have the energy right now.

I can't believe you had most of your exhaust wrapped. I stuck some reflective insulation on the underbody till just past the cat & thought that'll keep more heat out of the cabin. But extra exhaust velocity? Valid theory; real world gains or placebo?

Feelin' your pain Dale. :unsure:

Putting off my 2nd removal - just don't have the energy right now.

I can't believe you had most of your exhaust wrapped. I stuck some reflective insulation on the underbody till just past the cat & thought that'll keep more heat out of the cabin. But extra exhaust velocity? Valid theory; real world gains or placebo?

Mine was done because I "aquired" about 30m of wrap from my employer when we were re-lagging boiler pipework.

The gains seem to be there; retaining heat in exhaust gas is critical to keep exhaust flow high. If there are tangible gains in N/A applications, it stands to reason that we have more to gain.

I'm doing it more for the insulative qualities, and it looks much nicer than fluffy fibreglass wrap. It also protects the pipework, which can't be a bad thing either.

My mate also does a coating on intercoolers and radiator cores that improves efficiency by a claimed 20%, it just looks like a satin grey metallic finish.

Several V8 Supercar teams tested and now use it on their radiators; they wouldn't waste their time if it didn't work.

My mate also does a coating on intercoolers and radiator cores that improves efficiency by a claimed 20%, it just looks like a satin grey metallic finish.

Several V8 Supercar teams tested and now use it on their radiators; they wouldn't waste their time if it didn't work.

I don't know if your mate is my mate (Chris from Craved Coatings), but he did the radiator, oil cooler and sump on my race car, it definately ran a degree or 2 cooler afterwards. When you are pushing everything super hard, every degree makes a difference.

Mmm, interesting, thanks guys. Will have to do some research.

Mods that net only small gains are valid, especially if super easy & cheap to do (ie wrap, not necessarily coatings :) )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...