Jump to content
SAU Community

Recommended Posts

Had noble intentions today of fitting up the LSD rear end & the Scotty dump, front pipe & new Blitz Nür catback I got the other day...

Diff went in fine, but I was foiled utterly by the stock dump pipe... :(

I even called Scott to walk me through it, but couldn't for the life of me remove the O2 sensor with the tools I had - and as a result I couldn't get to the top centre nut to the dump pipe flange.

Fitted up the rest of the exhaust to the stock dump (will be forced to ask Craig to do it for me while I hang my head in shame) and I'm glad to report that its SUPER quiet. At idle, it's not much louder than the standard exhaust & probably just as loud as the induction roar on WOT.

Will be interesting to see if there's any change in noise levels once the factory dump/cat is swapped for the good one...

I'll be at the workshop bright and early tomorrow if you want to head down. Give me a buzz or SMS on 0406754304.

finally ive been waiting to post this. :yes:

cars tuned, very happy with the results its been a long time( almost 3 months) with issue and constantly annoying the guys on here.. but first in WA :)

it is road tuned so no dyno results as yet guys but its a big improvement and im sitting at 19.5psi :)

id really like to thank Scotty, Craig, Ryan and of course all the others for imput for helping me through the tuning/ mehanical issues ive had. :cheers::cheers::cheers:

i will get dyno run for all you doubters eventually lol

Nice work Chris.

What was the boost issue in the end?

No fault codes I take it?

Got the audio controls on my steering wheel working with my head unit. Just 2 wires to connect together & another one to ground then store the functions in the memory. No fancy conversion box required in my case.

It sounds so simple when I read this back, lol. There were lots of hours of searching, reading, prodding & measuring to get to the point of 5 minutes of soldering & crimping. Been meaning to do this for 18+ months - thanks Rich (richzx) for the motivation to get off my bum & do it :cheers: .

I'll be at the workshop bright and early tomorrow if you want to head down. Give me a buzz or SMS on 0406754304.

Had super happy family time today and couldn't sneak away. Do you work nights, Dr Craig? :O

Edited by Mr 20Valve

Finally got around to fitting a full radius bell-mouth in the factory air-box. Happy with the fit and yet to see if the Airflow properties have improved performance. its certainly better than the crude OEM bellmouth IMO.

post-92140-0-44685200-1367385454_thumb.jpg

post-92140-0-74520600-1367385477_thumb.jpg

post-92140-0-64755600-1367385485_thumb.jpg

Finally got around to fitting a full radius bell-mouth in the factory air-box. Happy with the fit and yet to see if the Airflow properties have improved performance. its certainly better than the crude OEM bellmouth IMO.

Nice Benny. Will be good to hear how it reacts to that.

You'll enjoy that mate!

Any work on the suction/intake side to aid flow?

Thats one of the next things to sort. Just looking into options. I need it before I get an emanage etc.

But so far mod list is

Sierra stage one turbo

Nismo ecu

Scotty dump

Scotty front pipe

Nismo exhaust

HDI front mount will go on this week

Looks like I have a plenum spacer lined up

Just ordered a shift kit

Also have scottys coolant mod sittting there to go in.

What do people think is the best suction pipe?

Mine works quite well. It would be fine for that turbo. Also skirts the AFM cut issue.

Is relatively cheap and made on a jig as a direct replacement for the OEM restrictive cast nugget.

Completely invisible once fitted. I have several of these in service and performing well.

Scotty makes an excellent one, and is proven at huge power levels.

AM Performance in Radelaide do a very neat replacement; Ryan (Bigkevracer) can vouch for it.

Edited by Daleo

Mine works quite well. It would be fine for that turbo. Also skirts the AFM cut issue.

Is relatively cheap and made on a jig as a direct replacement for the OEM restrictive cast nugget.

Completely invisible once fitted. I have several of these in service and performing well.

Scotty makes an excellent one, and is proven at huge power levels.

AM Performance in Radelaide do a very neat replacement; Ryan (Bigkevracer) can vouch for it.

Yeah I was going to ask you about yours. What do youcharge for yours? What numbers have people pulled with your pipe?

I have been looking at the AM one but not completely. Sold on it yet.

Scottys is a possibility. But he does require the car which is not out of the question but would be better not having to drive to mexico

Yeah I was going to ask you about yours. What do youcharge for yours? What numbers have people pulled with your pipe?

I have been looking at the AM one but not completely. Sold on it yet.

Scottys is a possibility. But he does require the car which is not out of the question but would be better not having to drive to mexico

PM coming your way.

What have I been doing to my stag lately,

Well I put on R33 front & rear calipers with

brand new dba slotter rotor and project mu pads.

Brakes feel really good now

And just last night I put in a recaro bucket seat

With a bride super low seat rail only bad thing is

I can't see over the bonnet now :-(

Hey Josh can you be a bit more specific with the difference the intake made? I want one but don't want the AFM cut out issue or maxing the injectors. You have the standard turbo as well?

Hey Dale can you pm me the price on yur intake please?

Here's a couple of rubbish pics of my car with the new wheels on 19*9.5 + 35 with 245/40/19 tyres. The handling is much improved.

Stagea001.jpg

Stagea002.jpg

Stagea004.jpg

I can't get the caps on because of the hub nut things but I think it looks good without the caps anyway.

Here's a couple of rubbish pics of my car with the new wheels on 19*9.5 + 35 with 245/40/19 tyres. The handling is much improved.

Stagea002.jpg

I can't get the caps on because of the hub nut things but I think it looks good without the caps anyway.

I can't stop staring at the entrance way appearing like it's sinking into middle earth.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...