Jump to content
SAU Community

Recommended Posts

Installled new head unit. Working well and much better sound.

What connector is that? it was connected in the old head unit

If that head unit is like mine should have wires in the loom labelled key1 / key 2. Tap into that connector red to key 1, green to key 2 and yellow to ground.

Speaking of which, in what was perfect timing my factory Bose unit died (at least the AC was stuck at 18°) . It'd been playing up for a few months, not playing nicely with the Grom USB2+. Luckily I'd already gathered the required replacement parts and had them sitting there ready. Cheap Chinese Android head unit with a PAC ROEM-NIS2 interface unit (because i'm lazy)

post-128502-0-05747300-1453781413_thumb.jpg

bolt on Dolphin intake pipe from JP

:rolleyes::rolleyes:

attachicon.gifIMG_1680.JPG

attachicon.gifIMG_1686.JPG

attachicon.gifIMG_1688.JPG

attachicon.gifIMG_1687.JPG

It's a shame that it doesn't fix the actual part of the intake that causes all the restriction.

Yes steering wheel control plug . Previous owner of my stag had it all working to a degree i replaced headunit and have since lost all controls

whether it is possible that the connector is somewhere else

Because I dont have buttons on steering wheel ;)

whether it is possible that the connector is somewhere else

Because I dont have buttons on steering wheel ;)

From memory the plug has about 6-7 cables running to it from the loom only 3 operate the steering wheel controls or are needed ? I could be wrong in saying this but most cars from base model to top of range have same looms and plugs in place it just a matter of weather they utilise them for that model

It's a shame that it doesn't fix the actual part of the intake that causes all the restriction.

It's barely a restriction though. Think of those whale pen15 intakes on Hondas. It still only goes to the throttle body inlet size.. same goes with the turbo inlet... it's only gonna suck what it can spool... if that makes sense. It's more on the compression side that it really matters

It's barely a restriction though. Think of those whale pen15 intakes on Hondas. It still only goes to the throttle body inlet size.. same goes with the turbo inlet... it's only gonna suck what it can spool... if that makes sense. It's more on the compression side that it really matters

Having a huge chunk of air sitting there ready to go will help improve response/spool.
  • Like 1

It's barely a restriction though. Think of those whale pen15 intakes on Hondas. It still only goes to the throttle body inlet size.. same goes with the turbo inlet... it's only gonna suck what it can spool... if that makes sense. It's more on the compression side that it really matters

Good lucking pushing over 200kw without swapping the lower intake pipe. Where with an after market one you can push over 300 so I think it is rather restrictive

  • Like 1

It's barely a restriction though. Think of those whale pen15 intakes on Hondas. It still only goes to the throttle body inlet size.. same goes with the turbo inlet... it's only gonna suck what it can spool... if that makes sense. It's more on the compression side that it really matters

You obviously haven't removed the suction pipe yet...

  • Like 3

Good lucking pushing over 200kw without swapping the lower intake pipe. Where with an after market one you can push over 300 so I think it is rather restrictive

Context is more along the lines of having a daily driven than chasing powaaah. Velocity stack on end of turbo ftw then.

Ps found the link to the 2009 post and no. Haven't removed that part yet.

http://www.sau.com.au/forums/topic/296472-fisher-mk2-suction-pipe/

Edited by Reaperblitz

So as some of you know last Thursday my car was stolen from my driveway, it was found on Friday morning crashed into a tree. I’m pretty gutted as I have put a lot of work into it. Here are some photos of the damage caused

Glass on my driveway
59cEpf.jpg

Rear Quarter Damage
ouoc88.jpg

Tailgate Damage
iOIDkZ.jpg

Broken Windows
V7bo65.jpg

Panel Damage
mBWNS7.jpg

Broken Window
h2d5w4.jpg

c1JUMD.jpg

Cracked Windscreen
spVQD7.jpg

How they hotwired it
2khRFM.jpg

The same day that I came from the salvage yard, this was waiting for me at my desk. It’s the grill that I ordered from Japan in November
krqAnY.jpg

That is fkn terrible. Arseholes.

Nobody saw anything?

Presume it is a write off?

I asked neighbours, and my street there is normally someone outside, nobody saw anything.

It is getting assessed by the insurance company today, but i dare say it will be a write off

Edited by DrLui

I grieve for you.. buy it back and sell off the parts or put towards another stag?

If the insurance co operate, i do plan on buying it back, keeping what i want, selling what i dont, then buying another and starting again

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...