Jump to content
SAU Community

Recommended Posts

Thanks Adam, I figured the 20% additional flow should be able to cope at this stage. Seems like I was right, I just saw Nismoid mention minimum 700cc in another thread and started to wonder... :thanks:

500-550cc injectors will not allow -5s to perform to their full potential power wise as they will not slow enough.

700 are needed at a min, which is the next "size" up in the jap brands IIRC as there is a gap between 550 and 700 where nothing fits

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Just as my stockies would top out at 305rwkW these will top out at 360rwkW... My bottom end will be annoyed prior to this though.

Cam gears and 100k service bits to buy, then I'll book it in. Might leave it a month or so and revive this thread as I have a bill coming up on another car this month...

im with you GT-R32 everyone always burns -5s if the word "response" is in the thread. Im about to upgrade to -5s on my 26, ive got old school Nismo steel wheels on my car now, it makes 311kw and they are maxxed, it makes more boost on a cold night lol but if its warm im lucky to make the 18.5psi its tuned for, even in 4th gear with a full pull. comparing my dyno sheets to the cars with -5s, my car will be the same if not less laggyer with the -5s bolted up. The power line will just keep climbing instead of flating out : D

True that,

Got R33 N1's on my now old dinosaur things making 330kw, looking forward to better response plus lots more power ;)

500-550cc injectors will not allow -5s to perform to their full potential power wise as they will not slow enough.

700 are needed at a min, which is the next "size" up in the jap brands IIRC as there is a gap between 550 and 700 where nothing fits

Nismo 600 purple tops? Prob still not big enough though.

I have a built forged engine running standard cams with Tomei cam gears, standard head, air box and running -5s at around 20 psi on a safe tune.

The exhaust is 3.5" with a matrix 3.5" cat, this reduces down to a 3" exhaust about 600mm past the cat which includes two 3" elbows and a 3"muffler.

The cars at the workshop now and they are changing it to a full 3.5" system with a dyno run for minor adjustments to suit, its currently pulling 338Kws, this is a genuine back to back dyno run with an exhaust upgrade so it will be interesting to see what and if there is any differance in the power levels running the same psi and safe tune, results next week, Cheers.

To all the exhaust buffs.

Just picked the car up now with a full 3.5" exhaust, its gone from 338kws to 355kws and spools a lot earlier.

Happy Happy :cheers:

To all the exhaust buffs.

Just picked the car up now with a full 3.5" exhaust, its gone from 338kws to 355kws and spools a lot earlier.

Happy Happy :cheers:

Thanks for letting us know. Thats a handy little increase and it confirms what is expected WRT power and spool. If it were me, next step would be to try a decat on the dyno to see if there's any potential for a better result with a bigger (5 inch?) cat.

  • 6 months later...

Still haven't done anything (I know!), the car has sat unregistered all winter. Thinking of not fitting the Blitz injectors, but I'm having trouble finding Sard 700s and don't want to pay Just Jap over $1k for them.

Are these bolt in, with nothing else to be done as per the 700s?

http://www.ebay.com.au/itm/SARD-INJECTOR-800CC-Twin-RB26-SKYLINE-R32-33-34-GTR-/140458575853?pt=AU_Car_Parts_Accessories&hash=item20b3fbc7ed

http://www.nengun.com/sard/injectors

63566 (6 X 800cc)

Going to get some new discs and pads and it's time to decide where I get the work done... :/

Still haven't done anything (I know!), the car has sat unregistered all winter. Thinking of not fitting the Blitz injectors, but I'm having trouble finding Sard 700s and don't want to pay Just Jap over $1k for them.

Are these bolt in, with nothing else to be done as per the 700s?

http://www.ebay.com.au/itm/SARD-INJECTOR-800CC-Twin-RB26-SKYLINE-R32-33-34-GTR-/140458575853?pt=AU_Car_Parts_Accessories&hash=item20b3fbc7ed

http://www.nengun.com/sard/injectors

63566 (6 X 800cc)

Going to get some new discs and pads and it's time to decide where I get the work done... :/

have you looked at Deatschwerks injectors?

straight drop in (they're high flowed stockers)

have you looked at Deatschwerks injectors?

straight drop in (they're high flowed stockers)

Shit they look excellent. :cheers:

http://www.deatschwerks.com/products/fuel-injectors/sport-compact/nissan/skyline/skyline-gtr-rb26dett-89-02

Any one had any experience with them? 750cc or 880cc is sweet. Given they are both $549, I'm tempted to go for the 880cc!

Still haven't done anything (I know!), the car has sat unregistered all winter. Thinking of not fitting the Blitz injectors, but I'm having trouble finding Sard 700s and don't want to pay Just Jap over $1k for them.

Are these bolt in, with nothing else to be done as per the 700s?

http://www.ebay.com.au/itm/SARD-INJECTOR-800CC-Twin-RB26-SKYLINE-R32-33-34-GTR-/140458575853?pt=AU_Car_Parts_Accessories&hash=item20b3fbc7ed

http://www.nengun.com/sard/injectors

63566 (6 X 800cc)

Going to get some new discs and pads and it's time to decide where I get the work done... :/

ID 1000's. Done!

800's will need new plugs, 700's have the right plug

Spray/nozzle is also different 700 to 800

I cant remember exactly which way it is, but one is twin and one is single.

Im fairly certain the 700s were the twins... (but please dont take that as 100%, cant remember when i looked @ mine :()

Still haven't done anything (I know!), the car has sat unregistered all winter. Thinking of not fitting the Blitz injectors, but I'm having trouble finding Sard 700s and don't want to pay Just Jap over $1k for them.

Are these bolt in, with nothing else to be done as per the 700s?

http://www.ebay.com....=item20b3fbc7ed

http://www.nengun.com/sard/injectors

63566 (6 X 800cc)

Going to get some new discs and pads and it's time to decide where I get the work done... :/

some new 700cc ones for sale here

Do ya know if the 800s are different?

I remember there being a difference at the top, just not what :wacko:

Yeah man. My 800's were a duel hole injector that needed new plugs (although I believe you can get single hole 800's, but I could be wrong), 700's are stock plugs and single hole.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...