Jump to content
SAU Community

Recommended Posts

I use a Magnafuel washable filter. Methanol/Ethanon compatible.

I tested the local Caltex last week and can confirm they are still supplying E75. Hence im sticking with the United stuff (E90).

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

How easy is it to retune for a massive change eg E70 to E90, can you just do a rough across the board adjustment and accept it will be good enough, or does it really need to go on the dyno?

How easy is it to retune for a massive change eg E70 to E90, can you just do a rough across the board adjustment and accept it will be good enough, or does it really need to go on the dyno?

I didn't find the change that severe although I only changed from the Southland Manildra e85, 1 afr on the wideband richer. I guess you could fiddle with injector size if you have a wideband, just run it a little rich just in case.

I did find extra power though when I tuned for Eflex, just wondering if the ethanol needs a little petrol kick to get it firing quicker in the chamber. As Trent has said, its like C16 straight from the pump, at $1L.

  • 1 month later...

I recently got my car tuned by Gavin Wood

RB25 with GT3076 0.82 external 50mm gate.

Gav said he couldn't get more than 250kw at 1.1bar out of it safely. When I asked why, he said it's probably just because it's an older worn engine with alot of carbon buildup.

If I was to grab some big injectors and swap to E85, would that overcome this problem to a certain extent, and allow me to run more boost/timing to get more power out of the car, or would that just be asking for trouble?

Thanks guys!

I recently got my car tuned by Gavin Wood

RB25 with GT3076 0.82 external 50mm gate.

Gav said he couldn't get more than 250kw at 1.1bar out of it safely. When I asked why, he said it's probably just because it's an older worn engine with alot of carbon buildup.

If I was to grab some big injectors and swap to E85, would that overcome this problem to a certain extent, and allow me to run more boost/timing to get more power out of the car, or would that just be asking for trouble?

Thanks guys!

It would only be asking for trouble if you upped the boost a heap, just filling with e85 and remapping the fuel would make the tune much safer as there is no chance of detonation, and the 30% extra fuel volume will cool the pistons more. I don't see a down side at all other than finding a local servo. Dual map it though if you can, just as a backup.

Gav said he couldn't get more than 250kw at 1.1bar out of it safely. When I asked why, he said it's probably just because it's an older worn engine with alot of carbon buildup.

How old is old?? Mine is almost 200,000km and at 1.2bar it goes quite chirpily :)

1993 GTST... No idea what real K's are but i'm guessing they are probably around that... I think he said adding more timing didn't seem to make a difference so there was no point?

What sorta power are you getting at 1.2bar?

POST FAIL.... Sorry guys, copy and paste went wrong!!!!!!!!!!!

Edited by 34GeeTeeTee

250rwkw is not too far off for 1.1 bar...

from memory I had ~250 @ 1 bar with the 2835... but i never EVER ran 1 bar

shove 1.3 bar into it and you should see a substantial gain.

did gav try to add more boost, or just more timing @ 1.1 bar?

250rwkw is not too far off for 1.1 bar...

from memory I had ~250 @ 1 bar with the 2835... but i never EVER ran 1 bar

shove 1.3 bar into it and you should see a substantial gain.

did gav try to add more boost, or just more timing @ 1.1 bar?

Listen to this man!

God damnit I want to get tuned for E85 now!!!! I'm running a pissy 17psi (dropping to 16) on 98 :( I'd love to up it to 19psi on e85....stop bumping these damned threads! you're giving me bad ideas

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nice one, I'd argue that the white S1 RS260 is certainly the best looking of the Stageas. And yes, fully agree on the forum situation. It's a bit of a shame, but at least SAU is a good place to be. I found the facebook groups to give me FOMO because people were trying to one-up each other and show off in some way. Feels much more natural here. There are people with seriously nice builds, but I can appreciate it rather than it making me question my life choices. Might be that people are more open with sharing how much work/money/suffering it takes to actually get there. 
    • Evening, wanted to pop in and finally register to say hi to everyone here on SAU!   It's been a while since I've been active on a forum, but back in the day I used to be relatively active on ClubLexus and other hobby-related forums. I'm glad to see SAU is still around, since with the advent of Facebook and Discord it seems forums aren't what they once were. As a recent new owner of an S1 260RS Stagea, I've found so many older guides and helpful tips from SAU that I figured I needed to join and say a grave thank you. My recent acquisition has only become legal in the US for the past year, and knowing that similar car enthusiasts from across the pond have already figured out the kinks and tricks to get these 25+ year old cars running well. I look forward to diving into more of the SAU forums as well as hopefully contribute some info myself for future posterity.   As a pic tax, here is one of the few good photos I have of my Stagea. I hope to get way more in the future!    
    • Is this where I say "Hey man my airbox cost me horsepower in my Naturally Aspirated Engine"? (I know you need them for legality in NSW)
    • 1.5mm alloy folded up, it will need a tweek, as the angled bend only got to around 45° as that was the max that the break press would get with the other bends, and I needed a fair bit more, but and the alloy is easy to bend too my will by hand once I trim the lower section out I'll Dremel out and form the angle and mounting point on the lower section when time permits  As for the lid, I'm looking at going a "cap", instead of a flat lid to hide the fixtures a bit
×
×
  • Create New...