Jump to content
SAU Community

Recommended Posts

Engine is finished now :D

Only a week to get it Tuned and run in.

Nick and Ben over at GT Garage are doing an amazing job and working their fingers to the bone in order to get it done before the weekend so I can go in the Tas Drift Festival.

Some engine pron for you

engine7.jpg

Super happy fun times await. Hopefully I can pull a decent slide in it; it'd be a little embarrassing if I couldn't pinch.gif

Holy jesus that's one sexy looking engine bay... I'll be dropping in to the drift festival for a few hours today, keep your bonnet open and I'll come and have a looksie. Good luck with the competition, hope to see it in action!

Jay

I'm pretty sure this cars day went something like this:

1. Off

2. Warm up lap

3. Limiter

4. Limiter

5. Limiter

6. Go home time

Sounded awesome and the engine definitely looks the part (thanks for leaving the bonnet wide open, had a good perve).

Interested to see exactly how you mounted your fire extinguisher, it's exactly where I was planning on putting mine :) Oh, and how'd those sway bars feel? Any adjustments on the day?

It was just an issue with fuel surging on spin out (as they didn't get time to fit the surge tank), was just playing it safe towing it off for a cool down and a check over.

Engine was run in on the dyno before the day.

Edited by SKiT_R31

Yeah I'm pretty sure it's the squishy fat thing in the middle that's letting the car down at the moment. But having never driven a RWD car with more than 60kw I think I'm going OK. Managed to link up the S's by the end of the day, got my hand out the window once too haha. Going to give her a go at the super sprints next week, hopefully I can get this car going with in a 10th of it's potential.

Here are some pics of my weekend :)

Loading up at GT

_1019316Medium.jpg

All loaded up :)

_1019321Medium.jpg

Quite intimidating :S

_1019322Medium.jpg

Pretty engine bay

_1019323Medium.jpg

Last minute touch ups with Dr. House...

_1019324Medium.jpg

First time giving it a boot full

_1019330Medium.jpg

-

_1019331Medium.jpg

Screamer pipe on full noise

_1019332Medium.jpg

Brown Trousers time

_1019333Medium.jpg

At this point I remembered my training... Kick the clutch 2m from the Apex....

_1019334Medium.jpg

Yeahhhhh!

_1019336Medium.jpg

Awwwwww

_1019337Medium.jpg

Just managed to hold on.

_1019339Medium.jpg

This hasn't gone to plan.

_1019340Medium.jpg

Yep...

_1019341Medium.jpg

Not gone well

_1019342Medium.jpg

No one saw that right...

_1019343Medium.jpg

The white menace lining up for Qualifying.

_1019349Medium.jpg

Trying to regain some dignity after the Driftkahna by frying em...

_1019377Medium.jpg

Still Sexy

_1019404Medium.jpg

Such a great weekend, one I'll remember all my life. Went from overwhelming excitement, to nausea inducing nerves, to sky high excitement and overall satisfaction.

Can't thank Nick and Ben at GT Garage enough for the enormous amount of work they've done on the car getting it from a clapped out ricer to the monster it is now, all in only 2 months.

Thanks for posting that up Dan, must have been at the end of the day when I was getting the hang of it.

Interested to see exactly how you mounted your fire extinguisher, it's exactly where I was planning on putting mine :) Oh, and how'd those sway bars feel? Any adjustments on the day?

Sway bars were really nice, the whole suspension setup was really really good, couldn't fault it at all, zero understeer, the car just did exactly what I told it to do, which most of the time was the wrong thing haha, but I'll learn.

We didn't make any adjustments to anything and I reckon it'll stay that way for a long time until I'm actually pushing any form of limit of the car. At the moment the car is only limited by me. I just need some more time behind the wheel :)

Edited by zoidbergmerc
  • 4 weeks later...

This is the interior if anyone was interested.

This has to be the only build in the history of skylines where there are less gauges in the after photo :P

How much weight did you drop when you emptied out the carpets/seats etc?

yeah haha, I need those gauges back though, the ones in the car were all broken and the new ones haven't arrived yet.

The original seats were quite heavy and the replacement seat you can lift with your pinky quite comfortably so I think a fair bit was saved there. The air bags were also quite heavy as well as the seat belts; but the rest of the carpet didn't weigh that much, no more than a couple of beach towels really.

The next big weight saving needs to come from the driver though, cutting back to zero beers and no junk during the week really made a huge difference, I still eat\drink what ever I want over the weekend though so it's not all bad. So far I've gone down 2 holes in my belt and I can fit into my old overalls that didn't fit two weeks ago. Haven't actually weighed my self yet though.

yeah but where does one obtain this dry ice you speak so fondly of?

not sure about that

http://www.google.com.au/search?client=safari&rls=en&q=dry+ice+in+tasmania&ie=UTF-8&oe=UTF-8&redir_esc=&ei=XiGtTbSiMOTdiAKss4zDDA

a few places by the look of it

i've never done it but i've seen a few diy's for it, you can use normal ice but it makes everything wet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The team at OBD2 Australia are pretty good, shoot them an email and ask them. I've dealt with them before for work stuff. I'd be shocked if it didn't work, so long as Consult can activate the ABS. But you might need to use KLine for it which would be the stopper, as I don't think that piece does KLine comms.
    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
×
×
  • Create New...