Jump to content
SAU Community

Recommended Posts

i work in a holden dealership (don't give me shit it's a good place to work and learn) but i've been having some trouble with a guy that's giving me constant shit about rb's and their oil pumps. and i mean constant. multiple times a day. he has a hsv clubsport (vx) so another guy that works there gives him shit about the gen 3 engine using engine oil. he has a track car that he drifts at mallala which is a soarer with a 1J in it and i need some thing to give him shit about specific to 1j and 2j engines. i know they are a great engine but i prefer RB's. any help? anyone?

Link to comment
https://www.sau.com.au/forums/topic/356589-1j-and-2j-engine-flaws/
Share on other sites

You want something bad about 1/2J's?

Hahaha, yeah.........good luck with that buddy.

The 2J and to a lesser extent the 1J are easily known throughout car communities around the world as some of the, if not "the" toughest Japanese tuner motor.

Solution? Tell the other guys to get back to work.

IMHO

The one 1J/2J has an inherint problem with their starter relay. You wont find one that has not encounterd intermittent and then total failure. WONT START!

I laugh at the number of Supra folk that replace starter motors, fuel pumps, ignition, wiring, relays, and even disable/remove/replace their immobiliser and all manner of things. BUT there is a cheap $30 and complete fix !!!! that I wont elaborate on because I own an R32 GTR!!! ......

Now with a NITTO oil pump and full engine rebuild due to not knowing the achillies heal of my GTR at time of purchase.

Supra = straight line and cheaper to buy kw's. Add a few corners and the tide turns - Dramatically!

IMHO

The one 1J/2J has an inherint problem with their starter relay. You wont find one that has not encounterd intermittent and then total failure. WONT START!

I laugh at the number of Supra folk that replace starter motors, fuel pumps, ignition, wiring, relays, and even disable/remove/replace their immobiliser and all manner of things. BUT there is a cheap $30 and complete fix !!!! that I wont elaborate on because I own an R32 GTR!!! ......

Now with a NITTO oil pump and full engine rebuild due to not knowing the achillies heal of my GTR at time of purchase.

Supra = straight line and cheaper to buy kw's. Add a few corners and the tide turns - Dramatically!

Bad news! Mines never, ever done that. Its been nothing but perfect in almost 4 years whereas the GTR has not if you put them side by side.

Also they dont turn corners well? Yeah not the ones slammed on 20's (same goes for GTR's though) but there are Supras out there that would surprise a GTR owner at how well they go. On this forum i wouldnt expect people to understand. As an example i had mine out on the weekend through National Park (lots of corners) with an MX5 owner in the passenger seat who always uses grippy tyres etc whereas my Supra is on cheat shit. He was shocked at how well it went. Also there's 2 other regulars on here (one 400kw GTR owner, one ex GTR owner) and both say the same about Supras now after being in a good one.

Sorry but ive owned both now for quite a while and the Supra has been flawless.

Sucks to hear that on a skyline site I know :)

  • Nope 1

yea the 1j and 2j are pritty bullet proof motors man, if only nissan designed em and they came in the gtr. One thing the Rb has better is looks. the Rb26 looks heaps better thant he 2J in my eyes

Just start talking about his mother? Seems like the mature solution to me.

1JZ sound like vacuum cleaners in standard guise...and they are a bitch to work on, especially the rear turbo...other than that, pretty much flawless.

You're asking on the wrong website though. Check out some Toyota forums and search for common problems / faults.

  • Nope 1

Just start talking about his mother? Seems like the mature solution to me.

1JZ sound like vacuum cleaners in standard guise...and they are a bitch to work on, especially the rear turbo...other than that, pretty much flawless.

You're asking on the wrong website though. Check out some Toyota forums and search for common problems / faults.

I might have to resort to insulting his birthgiver. Or tell him I have no problem with Toyota. My grandpa, dad and mum are all very happy :)

IMHO

The one 1J/2J has an inherint problem with their starter relay. You wont find one that has not encounterd intermittent and then total failure. WONT START!

I laugh at the number of Supra folk that replace starter motors, fuel pumps, ignition, wiring, relays, and even disable/remove/replace their immobiliser and all manner of things. BUT there is a cheap $30 and complete fix !!!! that I wont elaborate on because I own an R32 GTR!!! ......

Now with a NITTO oil pump and full engine rebuild due to not knowing the achillies heal of my GTR at time of purchase.

Supra = straight line and cheaper to buy kw's. Add a few corners and the tide turns - Dramatically!

Bahahahaha. My Supra used to start so quick when it was stone cold, absolutely instantly. The GTR on the other hand, takes some convincing.

Supra can't take corners? LOL. Imbecile.

  • Nope 1

The head is inferior to the RB26.

Port sizing and rev's etc.

You are also comparing a 3.0 L in the case of a 2J to a 2.6 L

you cant fault the toyota bottom end.

But there is a reason that people put the 1j head on the 2J block...

They have a f**king shithouse turbo arrangement.

and whilst in many cases being much newer then a GT-R are still slower around a track.

To be honest you should probably not bother yourself with talking shit, just blow him away when it comes to put your money where your mouth is.

^^^Love the sig, so valid for this thread hahaha :D

Why is the 26 head inferior to the 2J head? The numbers a stock 2J head will do is nothing short of crazy.

Here's a fair fight, 1995, skip to the end thats what matters;

There's even another BMI vid there with a 32 vs Supra, same track and while the 32 comes second last and the Supra is last (the turbo AWD's were in that race), the 32 did a 1.08.75 but the Supra did a 1.08.00

Good point on the 1J heads on 2J bottoms, id love to know why they do that other than money. The people ive spoken to that are in that community have mainly all said its due to the 1J's being quite old now, and 2J bottom ends being so reliable and cheap its a simple and cheap fix plus they get a bit more capacity at the same time, so in that respect its sort of like a skyline owner and an rb30

  • Nope 1

Only flaw I know of with 2J's is that their harmonic balancers explode due to age. The sealant holding the balancer together lets go and they go BOOM.

Only common problem that I know of. But yeah as has been said, 2J is the best for a reason.

Why is it exactly that Supras are referred to as being 'shit around the track'

Youd think that going on forum-talk alone, that it should be considerably better than say a GTST or GTT, and provided it had good grip.. better than a rb26?

Is it just noone sets them up for cornering, etc? Or are there other issues and things 'wrong' with the Supra that GTT's/GTR's can best it 'easily', or is it just forum bias lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
×
×
  • Create New...