Jump to content
SAU Community

Recommended Posts

finally after getting the wrong coloured facia its all back together and I have a radio again!!!

I've put up a thread with the wiring colour codes in case anyone else needs to replace theirs, cant seem to link if for some reason though.....

Http://www.skylinesaustralia.com.forums/topic/437160-m35mradio-replacement-wiring-colour-codes/

post-83704-0-82187600-1388910123_thumb.jpg

  • 2 weeks later...

Finally got my go-pro footage from the SAU track day back on the 29th of Oct 2013 @ SMSP south circuit.

here was my last run where I got a free run with no traffic and managed 3 awesome laps

2x 1:09's and a 1:10.

http://www.youtube.com/watch?v=dcvL4eyt1qY

best of the day was a 1:09.14 with consistent 1:09's all day long :)

  • 2 weeks later...

starting to get p*ssed off with all the little niggly bits, so I'm going to try and sort them out before I loos my sh*t:

1) redo my headlights
2) need to get the bonnet struts as the fibreglass bonnet is to flimsy to support by the stock arm and so the AXIS bonnet add on is starting to fall off.

3) this radio change over has been a massive PITA, hate the aftermarket A/C buttons, and seems as though I've blown part of the BCM that controls interior lights, tail lights and parker lights so now I need to replace the BCM which seems more or a PITA than it should be.

4) need to tidy up my gauges as it looks like sh*t so going to have to pull my finger out and make a fibreglass one!!!
5) should probably replace my drive belts and fuel filter I'm guessing they are well over due!!!

6) need to get this window washer bottle cos its a PITA having a dirty window all the time that I cant clean whilst I'm out

once all this is done I might feel better cos atm I'm getting annoyed my cars turning to sh*t because of neglect!!!

ah well that's my rant for the week!!! :)

starting to get p*ssed off with all the little niggly bits, so I'm going to try and sort them out before I loos my sh*t:

1) redo my headlights

2) need to get the bonnet struts as the fibreglass bonnet is to flimsy to support by the stock arm and so the AXIS bonnet add on is starting to fall off.

3) this radio change over has been a massive PITA, hate the aftermarket A/C buttons, and seems as though I've blown part of the BCM that controls interior lights, tail lights and parker lights so now I need to replace the BCM which seems more or a PITA than it should be.

4) need to tidy up my gauges as it looks like sh*t so going to have to pull my finger out and make a fibreglass one!!!

5) should probably replace my drive belts and fuel filter I'm guessing they are well over due!!!

6) need to get this window washer bottle cos its a PITA having a dirty window all the time that I cant clean whilst I'm out

once all this is done I might feel better cos atm I'm getting annoyed my cars turning to sh*t because of neglect!!!

ah well that's my rant for the week!!! :)

I still have no 6 in pieces. :domokun:

I'll get cracking.

You makin a washer bottle Dale?

I did a cardboard mock up about a billion years ago for Theo; will use the OEM filler neck, and the side also acts an air guide for his oil cooler.

I have all the sheet guillotined and bent, neck made, then we had another kid. :rolleyes: I need to machine some bosses for the pumps to push through then get off my arse & weld it.

I'm so busy at work now, I barely get time to do my paperwork in the extra hour I work on top of my 12hr shift. Weekends used to be fab time; not anymore.

It might hold a litre of water, with the neck volume added; a little more.

It's something I was interested to make for myself, sounds way too complicated to make multiples of though.

I would love to get a second oil cooler in there... Not like you need 40L of washer fluid anyway. :P

It's something I was interested to make for myself, sounds way too complicated to make multiples of though.

I would love to get a second oil cooler in there... Not like you need 40L of washer fluid anyway. :P

I have the advantage of being able to use my cardboard mock up for templates; I'll see what this one turns out like.

A litre odd would last long enough.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...