Jump to content
SAU Community

Recommended Posts

Nice mate. Where did you source your boss kit and quick release from? Do you recommend dealing with the same people?

The Tuners Group... Cheapest i could find online and the service is OK, has been a very long process due to some glitches but still happy with the purchase! All done through PayPal so its safe!

Car is looking great matt. Been a while since I have seen it... bring on 2015 i say! Cant wait to hit the track with you and see how the car goes up close and personal!

Yeah mate! FINALLY do a track day together after all these years..... :woot:

Ok so I have actually just done this now, I think I wrote that wrong, you don't touch the bolt on plates that the bolt goes through, just the elongated hole in the actual arms

The holes in the plates is offset and when you put the offset to the inside as far as it can go the elongated hole in the arm doesn't go far enough so you have to elongate it about half a hole more, I have pics but can not post them on the forum with the 6 plus for some reason, if your interested PM me your number and I will text them across to you

PS, what cams do you have in there at the moment ?

Yeah send through pics for sure!

Cams are Tomei Type B poncams... Just off the shelf, nothing special :)

Hey mate idk if you have posted it up but on my phone theres like 200 pages to read through. What wheel alignment are you running and what have you done coilover and swaybar wise? im getting mine ready fof my first track day in march and i have my setup as 11deg castor, 2.5 deg front camber and 1.5 deg rear camber but im wanting to upgrade swaybars

Do swaybars for sure, best bang for buck upgrade you can do... I run 27mm blade adjustable front and 24mm blade adjustable rears...

Wheel align is changing each event as i am still setting up the car and have been limited by certain things...

Bloody hell your car sounds good in the videos!

Thanks mate! Sounds like ass at low revs at the moment but will change the rear setup soon to sound a bit better....

Thanks bud. Im guessing there whiteline units? Im just saving some coin for a cage currently planning on doing a hillclimb called Mt Alma Mile and last time i went there i saw one car flip into a paddoc so i reckon its cheap insurance haha

Yeah cage is a good idea! I will be extending mine for the 2015 season...

No, mine are Selby Swaybars sourced through Sydney Kid on here many years ago :yes:

Do swaybars for sure, best bang for buck upgrade you can do... I run 27mm blade adjustable front and 24mm blade adjustable rears...

Wheel align is changing each event as i am still setting up the car and have been limited by certain things...

....

Yea the drivers right foot

Ok so I just got a wheel alignment as I also put in 4mm RCA adjusters which take out a touch of camber and ended up with 3.3deg camber so with out RCAs I think you would end up with 3.4-3.5 deg camber with this mod

Shot me your number and I'll text the pics across :)

Just finished reading the whole thread, jeeeesus this car is amazing!
Really digging the whole stealth theme, but now with all those stickers its starting to look a bit like the Blitz Dunlop ER34 lol :P
Can't wait to start work on my 34, this has so much good info!
Hopefully I see this in person one day! (if it's ever street driven anymore haha)

  • 2 weeks later...

Just finished reading the whole thread, jeeeesus this car is amazing!

Really digging the whole stealth theme, but now with all those stickers its starting to look a bit like the Blitz Dunlop ER34 lol :P

Can't wait to start work on my 34, this has so much good info!

Hopefully I see this in person one day! (if it's ever street driven anymore haha)

Haha thanks.

TBH, the stealth theme was great while it was there...

For the 2015 season i will run only the required stickers by CAMS, i will do my best to maintain the clean look. However i can tell you it certainly does not look like the previous pics anymore.

If you need any help with the 34 just ask, me or one of the guys can most likely help!

It will be driven on the track mainly this year as that is where the build can really be appreciated ;)

MW%2034%20GT_zpsapfq03wk.jpg

  • 1 month later...

Well this thread has kind of been like this for a while -

tumbleweed.jpg

:whistling: :whistling: :whistling:

I have been pretty busy working on the car between going away on holidays and getting engaged etc.... Life has been great but time to get stuck back into the car... Hopefully ill be able to start posting pics of the progress shortly but the car is still away at the moment and will hopefully be back in the next couple of weeks so i can get it closer to completion...

Very happy with the new parts so far.... Firstly, thanks to Alex i have decided on my new rims -

Mats%20wheels_zpsgaxppt09.jpg

  • Like 5

After finding the damaged oil line i decided to clean up a few other useless bits in the engine bay... Aircon is now removed completely... I need to clean up a heap of useless wiring too

IMG_1492_zpszwrlxbw3.jpg

  • Like 3

Speaking of Safety...

The car was fitted with the Brown Davis half cage previously but unfortunately it did not meet the requirements of the classes i intend to run in...

So the old Brown Davis cage and 2 harnesses (11 & 12 dates but still good for club days etc) are up for sale...

IMG_1871_zpshvgjdplj.jpg

IMG_1866_zpsccajuoep.jpg

There is also the original owners CAMS certificate that came with it somewhere, however it has his personal details so i wont post it online.

Looking for $700 for the lot including the harnesses, bolts and base plates... I do not need any of this with the new setup :)

guess we're never going to cruise on public roads :(

then there's powercruise LOL... I'm keen!

Not likely :(

Oh and powercruise... Was at that yesterday... Nahh!!!

After the old cage came out we had to clean up the interior... Will not do it again as i do not have the patience... What a crap job :rant:

IMG_1841_zpst5lawxnv.jpg

IMG_1861_zpswwatvuw3.jpg

  • Like 2

Oh, i would totally snap that cage up, but as its welded together, i doubt shipping would be very nice?

I shipped it from Melbourne to here when i first purchased it as it was built in VIC at Brown Davis... PM me your address and ill see what it works out to be :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...