Jump to content
SAU Community

Recommended Posts

  • Replies 482
  • Created
  • Last Reply

Top Posters In This Topic

hi guys not sure if this is the right place to post tech issues on stageas and if it isnt could you please direct me but the problem i have is my poor stag (97' S1 AUTO) and started "lurching" when i get into 5th gear usually on the freeway but when i give it a little more gas and it drops down a gear it runs fine again. its almost like a rocking movement as if the gears arent quite biting properly, and slowing do to come up to intersections or round-abouts she'll sometimes stall/turn off... also when i do a full steer lock and reverse, i get a kind of faint knocking sound from the rear somewhere and its a lot louder if the snow / 4WD button is on...does this sound like my tranny is about to give up the ghost?-any advice would be a big help ay-cheers!

Edited by frowgli

Hey All, :)

Had my 2000 S2 RS4 for about 2 months now, freaking love it! :D

Random question here: out of the two options MV automatics shift kit, or just plugging the box... What are the pro's / cons from each option?

Also, is the Auto adaptive? Been making the most out of 1st quite a lot lately and now it holds first for a few weeks on about 20% throttle, which gets a bit annoying when trying to be sensible :( Any suggestions would be appreciated, Will take a look this weekend and see if I can find anything.

Also: I am chasing an exhaust/turbo/other parts, so if anyone here has stuff for sale that I might find useful and they want to get rid of them :) Let me know.

cheers,

Brendan.

Hey All, :) Had my 2000 S2 RS4 for about 2 months now, freaking love it! :D Random question here: out of the two options MV automatics shift kit, or just plugging the box... What are the pro's / cons from each option? Also, is the Auto adaptive? Been making the most out of 1st quite a lot lately and now it holds first for a few weeks on about 20% throttle, which gets a bit annoying when trying to be sensible :( Any suggestions would be appreciated, Will take a look this weekend and see if I can find anything. Also: I am chasing an exhaust/turbo/other parts, so if anyone here has stuff for sale that I might find useful and they want to get rid of them :) Let me know. cheers, Brendan.

Never mind, going to build a 26 up whilst keeping it pretty stock, may as well do a worthwhile mod :)

Never mind, going to build a 26 up whilst keeping it pretty stock, may as well do a worthwhile mod :)

haha thats what i am doing lol

Just make it man in the mean time. changes the car so much. I on my way doing that part at the moment

Edited by whitenight27

Hey All, :)

Had my 2000 S2 RS4 for about 2 months now, freaking love it! :D

Random question here: out of the two options MV automatics shift kit, or just plugging the box... What are the pro's / cons from each option?

Also, is the Auto adaptive? Been making the most out of 1st quite a lot lately and now it holds first for a few weeks on about 20% throttle, which gets a bit annoying when trying to be sensible :( Any suggestions would be appreciated, Will take a look this weekend and see if I can find anything.

Also: I am chasing an exhaust/turbo/other parts, so if anyone here has stuff for sale that I might find useful and they want to get rid of them :) Let me know.

cheers,

Brendan.

I have put the core plugs in my box and it was the best value for money mod i have ever done on my car

yo! hows everybody been.

we are planning up a cruise.

SUNDAY 13th May 2012.

time tentative still but planning for a 10 o'clock meet and leaving at 11.

MEET UP at city west car park.

city to hills run

back roads of serpentine.

needs input and suggestions on meet up time and where people want to go for the cruise.

me and chuckie are sorting out further deets and map this week.

we need your inputs guys to make this one a good cruise. stag heads havent had a good cruise as of late.

Edited by dethdori

SAD NEWS!! I found out Today that Steve Hobby has died. For those that knew him this is very sad news. He was a very likeable guy. He owned an Autech 260. His skyline name was Oteku260. This run on the 13th will be to his memory. I have no other details of his passing as yet. He died on or close to 5th April 2012. Our thoughts are with his family.

hi guys,

i did not really notice that the 13th of may will be mothers day.

due to this i will be moving the date of the cruise.

i think there will be conflict of interest on this day. so less people will show.

extending it for another week means that we have enough time to prepare and vacant our weekend for this cruise in memory of Steve Hobby (oteku260).

if this has been a bit of an inconvenience to you, i sincerely apologize.

i hope we can all make it on this as im really keen to put faces into names and meet more stagea owners as im new to the scene.

so here it is..

SUNDAY 20th May 2012.

time tentative still but planning for a 10 o'clock meet and leaving at 11.

MEET UP at city west car park.

city to hills run

back roads of serpentine.

mundaring weir rd.

2 stops for some pics and BBQ.

also i have a friend of mine who is a good photographer and just set up his media brand. he will be shooting pics and might even do a video for us on that day.

check out his facebook page.

HECTIK SQUIRREL MEDIA

https://www.facebook.com/pages/HectikSquirrel-Media/166278660151661

he shall be handing out cards and stickers if u guys are keen.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...