Jump to content
SAU Community

Recommended Posts

Melbourne performance center is $1650

Chequered (status) is $850

I'm getting a quote from dynomotive 2moro and will post up price,

Prices may differ this is just what I've been quoted

www.chequeredtuning.com - formerly known as Status Tuning

Trent is the guru of Nistune in Melbourne - do not hesitate, book now to avoid disappointment :D

seriously though, for what you want, Trent is 110% the man to take it to

  • 4 months later...

With the basic mods being fmic, exhaust and an EBC set to wateva would it be an option to send

my nistune ecu away to a company who is capable of having it tuned and the sending it back to me?

Reason is no1 here in central qld knows wtf a nistune is...

With the basic mods being fmic, exhaust and an EBC set to wateva would it be an option to send

my nistune ecu away to a company who is capable of having it tuned and the sending it back to me?

There are people who will do that but don't even think of it. You need it tuned in the car for your car.

I never even got as low as $1100 in Sydney but was $850 in Brisbane. Sydney is too fully sik for me, moving back to BNE in 3 months.

Edited by simpletool

$850 for board install and tune package @ chasers motorsport.

$770 for same thing somewhere in pakenham .. DMD i think , havent been there myself so =/

anywhere else with a good reputation for nistuuuuutuuuuutuuuuning?!

You don't want the cheapest you need the best.

There are people who will do that but don't even think of it. You need it tuned in the car for your car.

Ahh alright.

I thought bein a near stock car with the basics it would of been a more generic type deal.

Looks like Ill drive it down to brisbane

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...