Jump to content
SAU Community

Recommended Posts

Hey guys after speaking to Brad at boost today, turns out my safc wont help me as id hoped, so im just putting it out there that ill soon be looking for a pfc or some other decent piggyback/stand alone ecu,

so if you know of or have anything let me know & i can get back to you when it comes time

cheers

Get a z32 ecu (like $50) as it will run the vct or a rb20 ecu and get a rpm window switch to run the vct (it's what I do).

A board is around $400 ish

Install is around $100

Should be all set up for under $650

I like it for my set up.. 300+rwkw rb2530 with a T67

Get a z32 ecu (like $50) as it will run the vct or a rb20 ecu and get a rpm window switch to run the vct (it's what I do).

A board is around $400 ish

Install is around $100

Should be all set up for under $650

I like it for my set up.. 300+rwkw rb2530 with a T67

Get a z32 ecu (like $50) as it will run the vct or a rb20 ecu and get a rpm window switch to run the vct (it's what I do).

A board is around $400 ish

Install is around $100

Should be all set up for under $650

I like it for my set up.. 300+rwkw rb2530 with a T67

you need to add tune cost to that. i know that GT were $1100 base price for complete nistune job.

hmm now that is tempting, i thought they were around $1000-$1200 installed & tuned but $650 sounds much better

650 is only instaled. it wont run like that so you then have to instal it and tow it to a workshop then have them tune it wich will be min $300 so theres almost your 1100 for gt.

im pretty sure boost is cheaper than that but power fcs are cheap and they come with a base map and do all the things you need.

nistune is the cheapest way you will get around it but for the price and added benifits of a power fc it would have to be the next cheapest option.

if you find other cheaper ecus like link you will need to find a tuner that will be happy to tune with it. everyone tunes power fcs.

I'm happy with my Nistune =) very easy to figure out as far as tuning is concerned, and they come with base maps to suit all nissans so they run the same as the std ecu :) all up it was under 700 fitted but i have tuned it myself so saved a lot of money there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...