Jump to content
SAU Community

Recommended Posts

Simple Scenario:-

* You may have shut your boot & locked your car keys in

* You may be a long way from home

* But you have your mobile on you

* You call a relative at home who locates your spare key with remote attached

* Ask the relative to activate the "Unlock" button on your spare remote (next to their phone) whilst your phone is near the car

* Your car unlocks

Sinister Scenario:-

* You might have a valuable car

* You can be parked anywhere

* Two thieves...

* #1 is near your side and sees your key with remote attached

* #2 goes outside into the carpark with his mobile to wait for car lights to blink

* #1 with his mobile, calls #2 and activates "Unlock" on your remote (near the phone)

* Your car unlocks

P.S. If your battery in the remote is getting weak, press the "Unlock" button whilst placing it next to your neck > you get a couple more goes at it, before battery exchange.

Link to comment
https://www.sau.com.au/forums/topic/363950-car-lockout/
Share on other sites

Have you ever dried it before?

I did with my alarm system in the 33 when i locked my keys in the car.

Called up home (35-40 mins away) and got them to do this exact thing. Note that both batteries were fresh, as i had changed both within the week.

All i got was a buzzing through the phone. Didnt unlock. So i gues it depends on how the remotes work.

Scenario 2.. BS.

I have found the Arcing your arm to your neck does seem to work however. It also works for a distance thing. Like if think youve forgotten to lock the car and have already walked away.

Edited by gotRICE?
Link to comment
https://www.sau.com.au/forums/topic/363950-car-lockout/#findComment-5807513
Share on other sites

Mobile phone's use licensed radio frequency spectrum to transmit audio information (sound) encoded into data, and car alarm keyfobs use unlicensed RF spectrum to transmit lock and unlock codes.

So,

- they use different RF frequencies

- they dont understand each other's data

So - it sounds like bollocks to me, but i'm not an expert.

Of course, people without security engineering backgrounds regularly design security systems. These systems are easily cracked because the designers assume that just because they can design a system that they themselves cannot break that it is therefore secure. WEP encryption from Wifi networks is an example of this.

Link to comment
https://www.sau.com.au/forums/topic/363950-car-lockout/#findComment-5809092
Share on other sites

Hey,

You're talking about transmitting the radio-toggle-lock-code over a voice call on a mobile network, right?

Typical car remotes operate at 300-400MHz - way outside the "voice range" (say 0-2.4KHz) that could be successfully transmitted over a mobile phone.

Even if the signal were in the voice range, the compression that operates on mobile phone calls would probably prevent successful transmission.

Cheers,

SW

Link to comment
https://www.sau.com.au/forums/topic/363950-car-lockout/#findComment-5811577
Share on other sites

It works with some of the commodore remotes, my father locked the keys in his hsv, he called my mother who was some 20km away, she pushed the remote and held it up to the phone and it worked. Confussed the shit out of me because I was always told it doesn't work.

Link to comment
https://www.sau.com.au/forums/topic/363950-car-lockout/#findComment-5811644
Share on other sites

My car remote only disables the immobilizer for my car.

The doors uses good old keys, so if I locked my keys in, its either crow bar time or call RAC...

After locking my keys in my car before, I made it a habit to always use the keys to lock my doors so that won't happy again.

Link to comment
https://www.sau.com.au/forums/topic/363950-car-lockout/#findComment-5812800
Share on other sites

Simple Scenario:-

* You may have shut your boot & locked your car keys in

* You may be a long way from home

* But you have your mobile on you

* You call a relative at home who locates your spare key with remote attached

* Ask the relative to activate the "Unlock" button on your spare remote (next to their phone) whilst your phone is near the car

* Your car unlocks

Sinister Scenario:-

* You might have a valuable car

* You can be parked anywhere

* Two thieves...

* #1 is near your side and sees your key with remote attached

* #2 goes outside into the carpark with his mobile to wait for car lights to blink

* #1 with his mobile, calls #2 and activates "Unlock" on your remote (near the phone)

* Your car unlocks

P.S. If your battery in the remote is getting weak, press the "Unlock" button whilst placing it next to your neck > you get a couple more goes at it, before battery exchange.

Interesting find! :thumbsup:

I will give it a go when I get a chance.

Link to comment
https://www.sau.com.au/forums/topic/363950-car-lockout/#findComment-5814835
Share on other sites

chin idea works - been using that for 20 yrs.

It's been theorised that the skull creates a resonant cavity at the frequency used (433MHz) - and that empty cavities work best.

Oops!! Hi Chris :)

As for holding up a remote to your mobile phone... LOL doesn't quite cover it. FKN LOL!!! gets close. You're dreaming.

Link to comment
https://www.sau.com.au/forums/topic/363950-car-lockout/#findComment-5817737
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...