Jump to content
SAU Community

Recommended Posts

lol, must be!! I can confirm he is in fact 2m tall.

awesome physique for the height - thats what you get by being in the SAS; got a family friend in the SAS and his body was transformed on a massive scale over the years of intense training.

on a personal note, my great-great-grandfather was awarded a Distinguished Conduct Medal for 'distinguished services under fire or under conditions equivalent to service in actual combat with the enemy'. He refused to carry a weapon and was therefore assigned stretcher duties. In the heat of battle he (mistakenly) picked up an injured enemy soldier, realized his mistake when the soldier protested, turned around and rushed him to the enemy camp...... a very inspiring story to my family :)

  • 1 month later...
  • 1 month later...

564952_462864460397025_539193519_n.jpg

not very far off this... just not as lean haha

That's pretty decent, Id be happy with that. I think I am well on track for that at the moment. He's more ripped than built.

I'm a skinnier sort of build, so I don't think I posses the genetics to get built like some of the other pics in here unless I get on the juice...

Bullshit asshole, nobody likes the tuna round here.

Nothing can stop you from weighing 100kg if you really want to...the muscle gains will do it regardless of bone structure. However, due to bone structure, there's only so much width you can add before the muscle compounds and you just look bulky/tanked rather than big. As is the reason why short guys can look more tanked than than taller guys, despite similar strength.

  • 2 weeks later...

more on Bruce

220px-The.Way.Of.The.Dragon.1972.Bruce.Lee.flex.front.jpg

Bruce-Lee.jpg

apparently he really directed body building to where it is today. Was one of the first to have shakes in between meals, mind you I believe he was blending whole meats and veggies in his shakes. He was meant to have worked out for hours on end every day of the week as well. Wanted a fully functional martial arts body with the emphasis on strength, speed and agility.

  • 2 weeks later...

I don't do torrents and cbf searching, so you'll have to explain it to me. From the last time I read about him he was an influential figure in a lot of ways, no doubt, but didn't see anything about a link to the field of bodybuilding...

before him bodybuilding was alot about just being big. He comes along and all of a sudden it starts swaying about being cut as well.

he also is one of the first known people to use protein shakes as a supplement (however he was using raw meat and actual blended food rather then powders), also used electro therapy i believe to help gain.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...