Jump to content
SAU Community

Recommended Posts

Yep, I figure there is no point getting another engine for it to just lift the head again. This way with the L19's I know the head studs are good for 1500hp or more.

It looks like VQ25's have the same head bolts as the VQ3.5de hence the same head lift issues at around 500whp. Anyone pushing for over 300kw would have to consider these L19's at some point.

Yep, I figure there is no point getting another engine for it to just lift the head again. This way with the L19's I know the head studs are good for 1500hp or more.

It looks like VQ25's have the same head bolts as the VQ3.5de hence the same head lift issues at around 500whp. Anyone pushing for over 300kw would have to consider these L19's at some point.

This is your new target; kgo. :whistling:

Its easy, twin gt40's sticking out the bonnet should get me there. lol.

Thanks Dale but im more than happy with the powah it has now, It looks like I will have to do open heart surgery on my poor engine though, and Gleeson's.

my point exactly! i didnt know of any other ways to tell you its a waste of time and money to be fishing for a new engine with no history of it.

What can you do, no-one could have predicted I would stretch head bolts. Looks like the little 25 is not as tough as I thought. Hopefully its just the studs though.

Anyway, we can rebuild it, we have the technology... lol.

Its easy, twin gt40's sticking out the bonnet should get me there. lol.

Thanks Dale but im more than happy with the powah it has now, It looks like I will have to do open heart surgery on my poor engine though, and Gleeson's.

Lol, only joking...

It'll be interesting to have a proper look with the heads off, to see how bores, piston crowns & heads look after the number of km's you've done at your elevared power level.

What can you do, no-one could have predicted I would stretch head bolts. Looks like the little 25 is not as tough as I thought. Hopefully its just the studs though.

Anyway, we can rebuild it, we have the technology... lol.

Just how tough did you think it was?

It did overheat prior to this problem due to a radiator issue and has been pushing over 300awkw for a while now.

Not bad for an unopened 2.5.

Just how tough did you think it was?

It did overheat prior to this problem due to a radiator issue and has been pushing over 300awkw for a while now.

Not bad for an unopened 2.5.

Agreed, but if the head studs are all that need changing (and that's understandable at probably 600 flywheel hp) then lets do it and get on with tuning. Its not expensive in the scheme of things just inconvenient. Looks like i succeeded in finding the limits of the unopened engine anyway. lol.

I have never seen the temp gauge much over half way, not sure if it overheated or what. I always seemed to catch it in time, lucky I have the informeter... I think it's just the combustion pressure and that is what the VQ35 guys are saying too. Weak ass 3.5 bolts.

Id say you proven the stock vq25 to be very strong so far. I consider the head gasket and bolts the fusible link in an engine and your just tripped.

Yours is still testament to the strength of the factory bottom end. Good job and look forward to the finished result of the 76.

Agreed although it might pay to look into custom head gaskets while waiting for the studs to arrive.

Might as well do it while the top is off.

I can't find any, do you mean copper gaskets or Cometic, apparently the Cometic ones are crap and I doubt they make them for the smaller bore. At least they come in different thicknesses for the VQ35de's though. I have just ordered the stock head gaskets from Nissan but I have to rebuild 2 engines so if you can find a stronger hg option i'm all for it.

Frankly, if the head bolts stretch; even a million dollar gasket won't save you.

At least the Nissan gasket is a known quantity; sort the clamping issue and the problem will likely be gone.

Agree with dale, the cometic ones won't be any better than the stock metal one from Nissan, they are both multi layer gaskets, once shit gets in between them they need to be changed.. The L19's and some new head gaskets from Nissan and it should definitely not be the weakest part in your engine

Scott should shave the head while theyre off :P

Scott should shave the head while theyre off :P

higher comp with the 3071 and smaller rear housing would of been sweet and punchy as to drive around the street, but limited to 330-350

but try telling that to these damn horsepower junkies :P

Thing is if you get a bigger (3 or 3.5lt) engine chances are your going to need a bigger turbo then as well, I mean a 3076 is often considered just big enough for an rb30 and nearly all go bigger Gt35s...I think be best just to get a 2.5 up and running again, maybe slightly higher comp for kicks..most importantly sort out the overheating issues...

I may have to get the head decked anyway but they wouldn't be taking much off. I'm keeping the 2.5 for now.

I ordered the oem head gaskets today, and ended up getting the ARP L19 head studs for $399us. They should all be here in two weeks so that's how long I have to get the engine out and disassemble/check it. All going well it should be back on the dyno within a month or so, just got to learn how the pull a VQ down and reassemble it now. :)

well you got plenty of engines to practice on...its just a head job, how hard can it be..

just dont strip any bolts/threads..ended up costing me 130$ to get that little m6 retapped and helicoiled..:( but i had it running 2 hours later :thumbsup:

Ouch, not too bad considering you hacked at it with drill bits for hours though. :)

Thread doctor good to you? He didn't want a bar of my snapped thread with an easy out snapped off in it... I managed it by myself though.

So...under 300awkw should be find right? RIGHT?!?!?!?? no stud stretching for me yeah?

I ask because I plan to flog the hell out of the car in 61 days time....well at least for the 1st month anyway!!! :whistling:

After a visit to Cihan that is...

Edited by ironpaw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...