Jump to content
SAU Community

Recommended Posts

Fixed! haha- aint no AWD-style understeering shenanigans here!

Wow did i mishear that? not inconceivable with all the engine noise and tyre screeching :P

oh and love your work Eric, pretty smooth and very atypical of a yank to downplay their work "oh btw heres a few random pics" and then bust out some of the most awesome pics i have ever seen from a track day.

Marulan is especially hard to get good shots from unless your prepared to go bush and hit some of the far corners of the track, you got some great shots of Skylines doing what they were made to do. Looks like there is a 33gtst s2 just like mine there too, at least on the dry day that you went?

Never driven there in the wet but had a few wakefield days while it was raining and for all the fun i find it far too unpredictable (and im not the only as evidenced by your blooper reel) whereas on a dry track you can really hone your skills and find out what the car is capable of.

Thanks for the heel and toe lessons but nothing beats practice, practice practice!

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

Also, further to Duncan's post, learning to correctly heel-and-toe early before you get into a corner will help with engine braking, taking some of the pressure (and therefore heat) off your brakes.

I find i like to use the extra engine braking caused by the spin up of the motor when i don't heel/toe (of course easing the clutch out so avoiding compression lockup of the rears) and I still get the regular engine braking you're talking about from the closed throttle.

I guess the only way to interpret this however, is that my brakes are too front biased, because I reckon my way of doing it gives me better overall stopping. If the brakes were better balanced the non-heal/toe would cause compression lockup on the rears.

Yep, wrong way around Dave, original post fixed ;)

Jarrad, almost certainly that noise is your gearbox thrust bearing. A bit of noise from it is no issue, just replace it when you get the clutch done. It may have been brought on by the day but it isn't urgent to address.

Adam, spot on, if you are using compression braking and find it helpful, you should have more rear brake bias. It's really just a bandaid for something wrong in the barke bias (because a foot brake will always be more effective and consistent)

BTW Eric....always have 2 hands on the wheels when you are planning a spin :P

is that expensive duncan??

pretty much determining weather to join the wakefeild day on how much itll cost to fix it.

You don't fix it until the clutch dies.

Most R32 and R33s have the same noise, just keep driving until you need a new clutch itself.

im pretty keen but i got no stockies and since i work in bluescope theyve cut all overtime, so trying to cut back a bit hah. if its raining i may come so i can keep my tires on.

well see :)

im pretty keen but i got no stockies and since i work in bluescope theyve cut all overtime, so trying to cut back a bit hah. if its raining i may come so i can keep my tires on.

well see :)

im pretty keen but i got no stockies and since i work in bluescope theyve cut all overtime, so trying to cut back a bit hah. if its raining i may come so i can keep my tires on.

well see :)

dude, i've got some you can fry. these guys still haven't picked up the stockies at my place so i've got 6 lying around. more than welcome to use them.

The GTR lives!

just got it back from CRD about 10 minutes ago and proceeded to drive it very sensibly with out any sort of erratic or unnecessarily vigorous acceleration all the way home causing very little noise pollution in my neighbourhood. Or the exact opposite of that, I'm a little hazy on the details.

Apparently it blew one of the boost pipes off and just blind sided the ecu's ability to tell how much air was actually going into the engine, hence the epic over fuel.

Anyway, good to go for the next track day!

The GTR lives!

just got it back from CRD about 10 minutes ago and proceeded to drive it very sensibly with out any sort of erratic or unnecessarily vigorous acceleration all the way home causing very little noise pollution in my neighbourhood. Or the exact opposite of that, I'm a little hazy on the details.

Apparently it blew one of the boost pipes off and just blind sided the ecu's ability to tell how much air was actually going into the engine, hence the epic over fuel.

Anyway, good to go for the next track day!

great news Matt...you owe me a proper ride in that beast! Seriously, the flames coming out of the exhaust when i followed you in to Picton were epic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...