Jump to content
SAU Community

Recommended Posts

Oh, and found out I have the dreaded cylinder 6 oil leak! Oh well, doesn't stop anything running- sure put out a smoke screen last night!

I have got the idle running stoic at normal temperature. Still runs like a bag of shit though. At least I know it won't foul the plugs on the way to the tuner. Took it for a quick spin to make sure its drivable so its all good.

Question- what do I give it a tank full of now? I was thinking BP Ultimate, what do you guys think?

United 100 :)

James noticed that his untuned HKS V35 ran smoother on it. He then tried V-Power and the car was stuttering randomly when cruising. Dunno if it did it on BP Ultimate (I think it did), but for comparison he was quite surprised with how much better it ran on the United 100.

BP ultimate.

awaits new fuel debate.

P.S. before you say it Scott.....we cannot get E85 everywhere for the 100th time!

I don't see why you wouldn't just run 98 PULP...its not like you can crank up the boost if you do run E85 anyway....:ninja:

State: NSW United E85 servo's

Drummoyne

81-85 Victoria Road

Drummoyne

NSW

2047

Rozelle (Speedway)

127 Victoria Road

Rozelle

NSW

2039

Sure, not as many servos as us, we have about 20 now. :nyaanyaa:

I guess we just buy more ethanol than you petrol heads...

I don't see why you wouldn't just run 98 PULP...its not like you can crank up the boost if you do run E85 anyway....:ninja:

Well, yeah, I can actually- but I just don't need 22psi to see some horsepower....ninja.gif

State: NSW United E85 servo's

Drummoyne

81-85 Victoria Road

Drummoyne

NSW

2047

Rozelle (Speedway)

127 Victoria Road

Rozelle

NSW

2039

Sure, not as many servos as us, we have about 20 now. :nyaanyaa:

I guess we just buy more ethanol than you petrol heads...

Both of them absolutely nowhere near us!

Still, I would get both tunes. You guys seem to think I run this shit because it gives more power. That wasnt the reason at all, I wanted the detonation protection it gives and this is unfortunately what you require too now Alex.

Won't a good tune give him that! I've seen a few SR20de+T tuned by my mate and never had an issues with detonation as you tune it safe and correctly for each set up and situation.

It will be fine on 98oct

Edited by slippylotion

Still too much load on the rods, you want to run the least timing you can which makes it run like ass. Better, slower burning fuel is the key, especially with high comp engines.

Of course it will be fine on 98 but for how long...

Agree tuning is the key- which is why I'm using who I'm using. Det doubles or triples the load on the rods- thats what does them in. Idiot tuners jam heaps of ignition in them to bring them on hard- thats whats to be avoided as far as I can tell. Detonate on 98, detonate on E85- both will kill the motor, as it would any other motor. They just have to be tuned without producing overly high cylinder pressures.

Scotty- put it this way- by the time I went an bought a tank of E85, and drove it home, it'd just be about time to turn around and go to fill it back up. In the future, if it gets rolled out widespread around sydney- I'll think about it. I'm not keeping a fing barrel in my garage. This is a daily!

superchargedg-2003 coupe 5at-stock block-stillen stage 4-a couple more things-340rwhp on a dynapack(i dont believe it though) about 25,000 miles driven hard at times. 382rwhp and 396rwt on the greddy twins at 9psi. And its a 5at. 05/26/10 Update 82,000 miles FI'ed with 30,000 with the twins

Canadian - 2006 5AT Coupe. JWT TT @ 7psi ~370whp. Fast Intentions Exhaust, Defi Blue Racer gauges. Installed and tuned by Relentless Autosports. Built 5AT. Stock internals. 37k miles boosted 53k total.

voryGT-V-2004 Coupe 6MT, Greddy Twins,6psi low 350 whp and 10 psi 400high ,Fcon pron, plenum spacer, all bolt ons,15k on boosted motor, still running strong.

Mark350gt - 404whp 9psi. HKS Fcon VPRO. 750cc injectors, walbro fuel pump, and a bunch of other stuff. 13,xxx miles no prob.

These are a few of the poeple with higher kms. I'm a bit sick of people saying its a grenade. They got that rep because idiots in the US (and here too) didn't know how to tune them. Lessons have been learnt. I'm not saying its a strong as a VQ25, but don't underrate them either.

+1 United 100. My car always seems to run better on it, not sure what the difference would be for a tune though, 10% ethanol vs BP Ultimate.

You only have two Uniteds with E85 in NSW? We have more than that! Plus even more when you factor in Caltex and Liberty...

United 100 :)

James noticed that his untuned HKS V35 ran smoother on it. He then tried V-Power and the car was stuttering randomly when cruising. Dunno if it did it on BP Ultimate (I think it did), but for comparison he was quite surprised with how much better it ran on the United 100.

Could also come down to the fact that my BCM is FRIED, new one getting fitted tomorrow :thumbsup:

These are a few of the poeple with higher kms. I'm a bit sick of people saying its a grenade. They got that rep because idiots in the US (and here too) didn't know how to tune them. Lessons have been learnt. I'm not saying its a strong as a VQ25, but don't underrate them either.

Agreed, and the same goes to the people that have a prob with the CVT in the GT8, 3 months since I strapped the turbo on and I havent had a single problem with mine.:cheers:

Good luck today Alex. Look forward to seeing the result and reading the details :)

Could also come down to the fact that my BCM is FRIED, new one getting fitted tomorrow :thumbsup:

Possibly, and about bloody time it came in.

Give the service manager there a punch to the throat for me will ya mad.gif

Edited by iamhe77

Turns out we were a little offblush.gif

6943224533_1aa8d31cab_z.jpg

Things to note (no excuses! but various factors) Unigroup has whats explained to me as a "sad" dyno, not a Happy dyno like Envy Imports, Temp was about 31 or 32 in the cell by this stage. The Run was done in 4th Gear (unlike NM35s who use 3rd because of the speed cut)

Yavuz seriously knows his shit- as someone else had mentioned, dude is a scientist. He whipped out the calculator and estimated 175kw from my previous dyno sessions. Full boost comes on just after 2500rpm, and holds to just under 4 SPI by 6500rpm. That line you can see is 4 psi- sorry my photo is a bit crooked! Its pretty much full noise by about 4750rpm. Very nice flat graph.

AFR's are very conservative- starts at 12.5 and lowers to 11.5 by max RPM

Sorry, don't have a video, because I was in the car with Yavuz, going through the software. Very positive feedback from him re Uprev- comment was its much more user friendly than NISTune, and more set up like full after market (Link G4 / Haltech etc)

Someone must have snuck in and replaced my gearbox with a sponge when I wasn't looking- its gone to shit. I have the classic NM35 3 second wait before it snaps the next gear in manual mode. I believe that I can change this- the ECU has a torque management table - what we did to the base schedule was basically halve it (due to injectors and K value), so this needs to be applied to the gearbox too- the ECU tells the box when to expect max power, and adjusts the line pressures to suit. So thats a little project for me.

Hot start is acceptable- I have to work on cold start, as the car hasn't been cold!

So there you go- I'm a little bummed that I didn't crack 200, however its a blast to drive, the power is pretty instant, torque is great, it is (like every unigroup tune) a very safe and usable map. When done- the price was unbelievable. I actually paid him more than he asked, I thought he ripped himself off- told him to look out for me next time!

projects- plug the o2 sensors back in when its cold- see if the problem remains, cold start tuning, Gearbox scaling (will need mark from Abbeys help hereblush.gif), see how much I have left on the stock MAF, get upgraded MAF and shove 7PSI down it until something breaks!

SCOTTY- got your package today thumbsup.gif thanks. Hope nothing has melted- pinch.gif

Edited by PN-Mad

Congrats on the tune; as you say, it's less about the number, and more about how it drives.

It was incredibly humid today, and with the temp it's probably not too surprising. At only 4 psi; I reckon you'd be happy with that.thumbsup.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...