Jump to content
SAU Community

Recommended Posts

Looking at an new Audi A1 MV contract of a clients.

$33,615 MV purchase price, but once you add a just a handful of extras and all the other shit you need to pay for a new MV......Amount Payable $55,820 :/

12%?

Logbook

C per km

1/3 exp

It's under the MV limit if I'm correct

12%?

Logbook

C per km

1/3 exp

It's under the MV limit if I'm correct

Whatchu talkin about Willis? Not sure what your getting at lol

But to answer your question it is under the Luxury Car Tax Limit. It is also under the MV depreciation limit for Tax Purposes.

You have also listed down 4 methods of claiming car expenses which I'm not sure how it relates to anything lol

I'm taking about your client having a decent deduction on the vehicle based on the methods I posted up there lol

So I see, different wave lengths :)

It's under a company, so deductions are claimed outright. But then there are FBT consequences.

just what i saw, cant remember which ep of top gear, but they all chose the 370z over the m1

said it was a better car overall and the price was the last straw in the decision

yeah not to sure on exact figures

but i know 370z ain't no slug

370z was tested against a z4 not a 1m

looks wise the new z4 shits all over the 1m and the 370z is even uglier imo 350z looks better

got some quotes for powder coating at a joint in campbellfield

wheels $60 a corner

brake calipers $15 each

will do the writing on brakes myself with a paint brush or something. RIP front guards

now just need someone to come and remove these all off the car :closedeyes:

370z was tested against a z4 not a 1m

looks wise the new z4 shits all over the 1m and the 370z is even uglier imo 350z looks better

Really? IMO the z4 looks like dog balls. 1m looks tough! I think they use it as a safety car in the MotoGP.

370z was tested against a z4 not a 1m

looks wise the new z4 shits all over the 1m and the 370z is even uglier imo 350z looks better

yeah jonoe reminded me it was a z4

however i would rather a 330i over both anyway

got some quotes for powder coating at a joint in campbellfield

wheels $60 a corner

brake calipers $15 each

will do the writing on brakes myself with a paint brush or something. RIP front guards

now just need someone to come and remove these all off the car :closedeyes:

i'll do it for ya man. i've even got my own angle grinder

Really? IMO the z4 looks like dog balls. 1m looks tough! I think they use it as a safety car in the MotoGP.

hardtop z4s are hot. not sure about the soft tops though..

yeah jonoe reminded me it was a z4

however i would rather a 330i over both anyway

335i? yeah me too

i'll do it for ya man. i've even got my own angle grinder

thats terrible, thats terrible man. your mother brought you up wrong is what it is, your mother brought you up wrong mother f**ker

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...