Jump to content
SAU Community

Recommended Posts

Fwiw I had some bitch slam her car door into mine a little while back. When I pointed out that she was resting her door against mine, she deliberately started pushing on it and looking at me. As I went over to sort it out her massive boyfriend got out of the passenger seat and told me to forget about it. I said "fair enough" and let them leave.

As soon as they were gone I got my keys and went to work on his brand new wog chariot

Every...

Single...

Panel...

What psi pulley do these have? Is it audible from outside?

About 5-6 psi but drops off dramatically throughout the rev range in stock form (~280rwkw ish). Tune only sees 380rwkw no other mods. All it does is keep the boost stable and straight, increase the rev limit by 500rpm. And the boost will go up to about 9psi ish from what I've seen. Remember in a ford you just remap standard ECU and unplug so no cop trouble.

good colour combo to man they look good just like that eh

Thanks, it's exactly the colour combo I wanted - cost a tiny bit more than a white one I could have gotten but don't care wanted the black badly. Just needs some tint, might powder coat the rims black or similar as well at some stage - or as others have said get some cheapish rims in good sizes.

arent they like $60k? i want money :(

congrats, looks awesome.

Yeh a couple of G's off 60k

Thanks man

About 5-6 psi but drops off dramatically throughout the rev range in stock form (~280rwkw ish). Tune only sees 380rwkw no other mods. All it does is keep the boost stable and straight, increase the rev limit by 500rpm. And the boost will go up to about 9psi ish from what I've seen. Remember in a ford you just remap standard ECU and unplug so no cop trouble.

i'll beleive this after you bring it to the next dyno day ;)

380 at the rears seem too much and I don't trust the guys at motor mag, or whatever the mag link you posted was to even know the difference between flywheel and rearwheel kw's let alone report accurately on it

Fwiw I had some bitch slam her car door into mine a little while back. When I pointed out that she was resting her door against mine, she deliberately started pushing on it and looking at me. As I went over to sort it out her massive boyfriend got out of the passenger seat and told me to forget about it. I said "fair enough" and let them leave.

As soon as they were gone I got my keys and went to work on his brand new wog chariot

Every...

Single...

Panel...

hahaha awesome.

Had a kid whack a door into my car as he tried to climb into his parents toyota landcruiser. Shouted at the kid as he did not notice. His parents sat in the car without any response/reaction to their kids actions. Great parents :glare:

Luckily no damage....

Hey jeppe serious question if you don't work and don't study what do you do all day? Ive never been in that position sounds fair awesome, presuming you have no debts

Well I quit my job to go travelling for a few months in the US and Europe, then got back and have basically been training for bike racing next year. Living off savings, fixing up my folks house. Hanging out, playing Nintendo (Baseketball, anyone?). Am gradually looking for work but am very picky because I need lots of time off next year for racing and more os.

Dude, so much bitterness! My drug being 'not outraged' and 'forgiving' is actually quite a happy peaceful kind where I very rarely waste time and energy feeling pissed off. By the change in your writing I seem to be pissing you off. Chill.

Again you're missing obvious factors that you hadn't considered, mainly they involve empathy. I'm bored of this now so won't bother explaining them to you.

it takes a fair bit more than words on the internet to piss me off :) btw, you're only bottling it up inside. you should let it out more often ;)

I've had 2 cars keyed (including my skyline while on display at the GP), but that was by coward f**ks that were to scared to say something to me, so instead they attack your possessions.

Bit different in rim specs case, if they hit it hard enough to dent it and take paint, then there's no way they wouldn't have known they'd done it.

My current car is a piece of shit, I close the door with decent kicks in steel toed work boots, but I still take care in car parks for the sake of the car next to me, no matter how nice/shit it is. Occasionally I've knicked a car next to me, but never left any damage, it takes a decent hit to do that.

And like rimona said, they'll no doubt be thinking about how their car was keyed as a result of their carelessness, so in future they'd no doubt be more careful. Who knows jeppe, they might park next to you one day, maybe you should thank rimness.

And there's a word for how u just forgive everyone that wrongs you, it's 'pushover'

my point exactly. i don't care how "unintentional/accidental" you wanna make it sound, it's so easily avoidable just by being a bit careful.

If the person knew they had done it and intentionally ignored it then you have a point. But we don't know if that's correct. Maybe they had their earbuds in playing loud music and their dad had just died so they weren't thinking. You just can't make assumptions.

in what way, shape or form is that my problem? i'll put my earbuds in play loud music and drive over your car with a truck would that make it alright?

That's one way to go about it, or you could wake up and live in the real world.

lol if everyone looked at it with nothing but "forgiveness" there would be no prisons, kunts would just be forgiven and let loose :laugh:

Fwiw I had some bitch slam her car door into mine a little while back. When I pointed out that she was resting her door against mine, she deliberately started pushing on it and looking at me. As I went over to sort it out her massive boyfriend got out of the passenger seat and told me to forget about it. I said "fair enough" and let them leave.

As soon as they were gone I got my keys and went to work on his brand new wog chariot

Every...

Single...

Panel...

nah you should've forgiven her and forgotten about it :sleep:

Well I quit my job to go travelling for a few months in the US and Europe, then got back and have basically been training for bike racing next year. Living off savings, fixing up my folks house. Hanging out, playing Nintendo (Baseketball, anyone?). Am gradually looking for work but am very picky because I need lots of time off next year for racing and more os.

Fair enough.. I play basketball local hard o get games though..

About 5-6 psi but drops off dramatically throughout the rev range in stock form (~280rwkw ish). Tune only sees 380rwkw no other mods. All it does is keep the boost stable and straight, increase the rev limit by 500rpm. And the boost will go up to about 9psi ish from what I've seen. Remember in a ford you just remap standard ECU and unplug so no cop trouble.

380rwkw without mods? :mellow:

what do they weigh?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...