Jump to content
SAU Community

Recommended Posts

YO are much lower than MO.

imo MO and RO sit too high for anything other than a Gias / Stradia or something fixed back.

YO should be able to fit most seats, as there is plenty of room to dill addition holes.

Where are all these meets being advertised? I dont see them on the forums anymore? This all being done through Facebook? Someone link plz

Facebook brah

Add me Pat :P

+1

yes definately.. stayed towards the front so wouldn't get lost with idiots this time haha :)

Not sure where we were exactly, but we seemed to lose half of them at one point, then Neil/Aaron/few others left and rest of us ended up in Yarra Glen, Ash turned up somehow? Then headed back towards Ringwood and went for 24hr pancakes and photos. Yay for dinner finally lol

Didn't know you went on the cruise, thought I saw your car leave the carpark early. Might have been imagining things.

yeh when people decided to overtake others while going through the mountain, i decided it was time to leave..

Your the drift king though, no one overtakes you!

Tumbleweed.jpg

Hey there, pretty girl, you know exactly what you got

And I don't blame you at all, you can't resist it

Especially when the lights so bright and the money so right

And it's comin' in every single night

She don't wanna leave, she just stuck in

Hey there, pretty girl, you know exactly what you got

And I don't blame you at all, you can't resist it

Especially when the lights so bright and the money so right

And it's comin' in every single night

She don't wanna leave, she just stuck in

Girl trouble young man?

Or just a useless song?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...