Jump to content
SAU Community

Recommended Posts

Went all the way there coz autobarn epping said they have the faceplate/headunit surround I was looking for and they didnt even fkn have it. So frustrating

Oh that sucks man :(

Yep necrosis is nasty shit. Look up pics of brown recluse spider bites if you want nightmares...thankfully these are confined to the Americas. But white tail bites can end up pretty bad!

Wolf spiders are worse than the white tail's, just not as many around than what you will see white tails

although i nearly got bitten at work from one, one day last year... scary shit, there bites kinda are like the brown recluse spider

You've got 20/20 vision now?

Better than apparently, even just a day after I could easily read the bottom line of the chart. Whereas before I would struggle a fair bit and only make out what the letters are.

All 250 sound pretty shit, excluding two stroke or v-twin. Ninja has become the new CBR250, which was the beginner bike to have before they got old. Anything you get you will be happy with, just being on a bike as a newbor is thrilling.

Just got trips in 3 card poker at Crown, pays 33-1 :D

apparently late model 250 ninja is the way to go for beginner. but looks too thin and sounds queer so meh

You won't really find anything else LAMS approved that looks as good as the 250 Ninjas do...That's what I'll be getting

Unless you get a Hyosung, they look ok, not a fan of the headlight though

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...