Jump to content
SAU Community

Recommended Posts

Fkn lol. Their prices on some things aren't too bad, actually. It's more a convenience thing for me, given I work in a neighboring suburb.

Going in on Monday for installation of various modifications and to see what this HG turbo is capable of! What are you getting done, Andrew?

Cam gears installed, injectors installed, nistune installed, service and full tune.

Yeah saw that thing on ACA pretty funny, I know the guy with the subaru also. His a pretty good bloke but yeah was just a shame that they were airing people who can't string two words together.

Soldet, baught.

Lol, start body work next week....

Long nights and pizza ahead for the coming weeks..

But the outcome is going to be soooooooo good.

Ideal turbos to run on a 25/30 k go.

In 4 pizza

Also 3582 .82

I think my alternator is kaput. Still got charge but the battery light comes on faintly, driving abouve 4k rpm it goes away.

32 GTR with the Mitsubishi 90 amp alternator. Anyone know a auto elect that will reco it or has reco ones??

be sure to note al's car has external gate with proper manifold

the car was very different when it had internal gate and same turbo

so its worth the extra $ for a proper external gate setup the difference in power delivery is worth it

al's car isn't easy to drive on the street...

just touch the loud pedal and you are sideways

Yep... rode in it few times, it simply have no acknowledgment of the word 'traction' at all.

Fantastic thing.

als car needs e85

my bros on e85 now smells nice, does it make rear bar less black? looks like it

Since I have had e85 I have had much less black on my rear bar. And your bros seems clean a lot of the time too

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...