Jump to content
SAU Community

Recommended Posts

What turbo did you get again?

Hypergear turbo with a Racepace tune?

SS1PU with a Nissan comp cover to keep it looking stock.

Birdman got the SS1PU in the standard housing.

What speed is 4,000rpm? About 115km/h? So that's about 165rwkw at 4,000 rpm?

Not sure, my tacho is not working at the moment so I can't really gauge it. Need to get someone to read off the hand controller lol.

More boost you pussy

I wanted 20psi for the midrange, but Chris said it was pinging too much for his liking so we'll wait for E85 :thumsbup:

30 grand?!

I'm sure Anthony would happy to drive you to the wedding if you ask him nicely.

As for me, when's the big day? I'm away for potentially 2 years - hurry up British Consulate!

yeah i wouldn't mind >,<

just no complains if the ride is super harsh!

SS1PU with a Nissan comp cover to keep it looking stock.I wanted 20psi for the midrange, but Chris said it was pinging too much for his liking so we'll wait for E85 :thumsbup:

I see.

Decent power for a streeter.

lolwut

LOL!

lolwut

'Not that there's anything wrong with that'

jerry-seinfeld-george-costanza.jpg

yeah i wouldn't mind >,<

just no complains if the ride is super harsh!

I'll keep you in mind brah

But yeah there will be pro photographers and a HD video of stuff so you guys can get copies.

Also i'll pay for fuel and we can negotiate some sort of fee arrangement too :thumbsup:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...