Jump to content
SAU Community

Recommended Posts

Yeah all those Easter egg hunts for keys to luxury sedans mus be taking it out of you.

On the topic of torx, I had an idea the other day...I don't think police carry torx bits with them, so if you were to install "heat shields" in your engine bay covering up...certain items...and said heat shields were fastened using torx screws...how could they inspect your vehicle on the side of the road? :)

yeh but it woould kill trying to fit two wastegates in there.. im trying to keep the whole setup low mount and away

twin gates? twin scroll doesn't need twin gates, its just twin entry into the turbo pretty much

mine only had one internal wastegate

Yeah all those Easter egg hunts for keys to luxury sedans mus be taking it out of you.

On the topic of torx, I had an idea the other day...I don't think police carry torx bits with them, so if you were to install "heat shields" in your engine bay covering up...certain items...and said heat shields were fastened using torx screws...how could they inspect your vehicle on the side of the road? :)

don't cops have tool kits in cars to pull stuff off?

it

Yeah all those Easter egg hunts for keys to luxury sedans mus be taking it out of you.

On the topic of torx, I had an idea the other day...I don't think police carry torx bits with them, so if you were to install "heat shields" in your engine bay covering up...certain items...and said heat shields were fastened using torx screws...how could they inspect your vehicle on the side of the road? :)

f**k up lol

How much is paint? Rent sprayer from you? > :D

it was like $76 + shipping. yeh i should see where it is first, ordered it like 2 weeks ago now

don't cops have tool kits in cars to pull stuff off?

Yep, don't think they have torx though. Just screwdrivers and sockets. Worth a shot :)

I'd stick a big trollface on the shield too lol.

I want to definitely hit over 300kw with e85. Hopefully I'll be at 20psi by about 3800-4k with the stage 2 cams. Bit laggy but I'm not fussed Using a .82 rear so we'll see how it goes. Can always go a smaller housing

:O

.82 in GTX on 2ltr

I think laggier than 3800rpm, and need at least 24psi to see 300rwkw on a 4 banger

Yeah all those Easter egg hunts for keys to luxury sedans mus be taking it out of you.

On the topic of torx, I had an idea the other day...I don't think police carry torx bits with them, so if you were to install "heat shields" in your engine bay covering up...certain items...and said heat shields were fastened using torx screws...how could they inspect your vehicle on the side of the road? :)

They'd probably just send you straight to the EPA or defect it...Guilty til proven innocent (at your own expense) is the way it seems to go here....

:O

.82 in GTX on 2ltr

I think laggier than 3800rpm, and need at least 24psi to see 300rwkw on a 4 banger

Yeh tuner wants to push 25psi through it, I probably will to get a figure then bring it back under. I think the .82 will be ok, plus if it isn't it's not going to be to hard to go smaller

They'd probably just send you straight to the EPA or defect it...Guilty til proven innocent (at your own expense) is the way it seems to go here....

I thought about this, and I know they can defect you for an exhaust on suspicion...didn't think they could defect you on engine mods they can't see and therefore don't know exist though...what would they write down on the paper? At least if they send you somewhere to get it inspected, it would allow you time to remove the illegal stuff before getting it inspected. You wouldn't avoid the pain in the ass but possibly avoid a fine.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...