Jump to content
SAU Community

Recommended Posts

Ha, I had a mate at uni who took his set of $800 rims from his corolla to get some SLIGHT rash repaired... the bloke was a panel beater doing some rim repair work on the side...

Dropped them off and was told he'd be called the next day with a quote, gets a call a few days later saying "They're all done, that'll be $650... Come pick them up when you're ready"

And the prick was threatening to not give the rims back until it was paid in full.

Small claims court with evidence of an email from the bloke saying that he'd call with a quote first... = gets the rims back for "cost price" of $200 and the panel beater gets told to stop being a cock :P

Job was crappy anyway... paint was chipping and fading after a few months.

SO GO TO A QUALITY JOINT!!!

Ha, I had a mate at uni who took his set of $800 rims from his corolla to get some SLIGHT rash repaired... the bloke was a panel beater doing some rim repair work on the side...

Dropped them off and was told he'd be called the next day with a quote, gets a call a few days later saying "They're all done, that'll be $650... Come pick them up when you're ready"

And the prick was threatening to not give the rims back until it was paid in full.

Small claims court with evidence of an email from the bloke saying that he'd call with a quote first... = gets the rims back for "cost price" of $200 and the panel beater gets told to stop being a cock :P

Job was crappy anyway... paint was chipping and fading after a few months.

SO GO TO A QUALITY JOINT!!!

lol.

Pretty similar thing happened to a friend of mine.

Repaired 1 rim at a cost of about 900 dollars, but a new rim would have been 1100. He didn't take it to small claims though.

Agree with you re going to a reputable company. I've seen some pretty crappy jobs.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

Can these guys un-buckle rims? My SS-V has a slight buckle in one of the rims but it's actually on the outter lip (not the inside of the wheel that most people have).

Took it to the mob at Moorabin but the bloke said it can't be done :unsure:

The freshly painted rotor you dumbass

What's wrong with that? The brake pad will just take it off anyway...

I always do it, leaves a clean line rather than an imperfect masked circle..

I still don't see how that's funny. It's actually smart - unless he is expecting the paint to stay there..

A lot of rotors actually come out completely painted like that.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

Not bad at all.

A lot of rotors actually come out completely painted like that.

My DBA4000's came soaked in that rust protection oil from the factory and had black painted centers which extended onto the rotors a bit...

Not once I got a bit of brake cleaner onto them to get rid of the oil :) Goodbye paint.

Yes, the brakes will get rid of the paint themselves, but I still would have covered the majority of it with newspaper and tape to stop the black from getting into the cooling vents, slots and dimples! That wouldn't be cleared by the pads right away...

Can these guys un-buckle rims? My SS-V has a slight buckle in one of the rims but it's actually on the outter lip (not the inside of the wheel that most people have).

Took it to the mob at Moorabin but the bloke said it can't be done :unsure:

I'm not sure if they can do that, email and ask :P

Not sure if prices have changed - been about 10 months since I got that last quote

My DBA4000's came soaked in that rust protection oil from the factory and had black painted centers which extended onto the rotors a bit...

Not once I got a bit of brake cleaner onto them to get rid of the oil :) Goodbye paint.

Yes, the brakes will get rid of the paint themselves, but I still would have covered the majority of it with newspaper and tape to stop the black from getting into the cooling vents, slots and dimples! That wouldn't be cleared by the pads right away...

Ever ran your finger nails through the slots to see how much crap comes out? Don't think a little paint is going to be a worry, and in any case the temperatures that the friction part of your rotors see is MUCH more than enough to take the paint off..

It will come off in the first 5 minutes of driving..

Oil is a different story, but paint? f**k masking it..

Yeah I pretty much covered my rotors, came off after bed in and looks neat vs masked ones that always seem to mask around the line in the center not the actual edge of the pad contact area and still end up with a rusted section :/

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...