Jump to content
SAU Community

Recommended Posts

Im not going to bite on the dyno comment... Although I will admit I do want to :P

I don't think you guys appreciate how much difference 400 kgs really is...

For an equal power to weight that car actually only needs 280rwkw to be on par with Leigh, and any more is gravy

If that car makes 350 we are talking approx 270 rwkw / tonne vs Leigh's 210 odd

That is stupid quick....

Although being a commo it probably has 400kg worth of subs :P

still, why is it that 1390kg gtsts with 325rwkw can only pull 12s? :P

there's a lot more to it than just power to weight, gearbox / ratios, diff / ratios, torque, turbo lag, power curve, tyres - not saying it wouldn't be fast though just saying a lot more to it, there's a reason why my brothers light gtst can't get off the line for shit it's too darn light at the back and that thing kills my power to weight even in 2nd it spins as soon as it hits full boost with 275 nt05s lol

Hopefully I'll get deep into the 11s (anything around 11.5 I'd be stoked) at heathcote next month, will have to be careful off the line don't want to break my input shaft or tail shaft lol

Edited by UNR33L

Comes down to car setup clearly, in all cases, but that's an unknown quantity in this car... All we know is power and weight.

You realise this wouldn't have even been brought up if you weren't constantly dickbagging on about your cars power :P

Comes down to car setup clearly, in all cases, but that's an unknown quantity in this car... All we know is power and weight.

You realise this wouldn't have even been brought up if you weren't constantly dickbagging on about your cars power :P

Hahaha yea I know

Then you have overpowered bikes :P

can't get over how expensive seat mounts are... rails are pricey enough. charge $160 for an aluminium set and they don't even drill holes in them.

made my last set, doesn't take long with the right tools. need another set for passenger now, time to get some aluminium

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...