Jump to content
SAU Community

Recommended Posts

Yeah, maybe Saturday or Sunday?

Can grab a steam cleaner for a few hours as well and give the seats a good going over :)Clean off the happy stains

Location of said 'happy' stains?

lol.

I dunno. Never dragged before and ive never done a "burn out" so wouldnt even know how to warm up the tyres. haha hooning does teach you things sometimes

I'd expect under 13 secs (but probably keep getting 2-3 sec 60footers)

Organic clutch? It's not nice to it but it gets you away with minimal wheel spin, revs up to 4-5k and slip the shit out of it though first til about 4k then let it fully grip and shift the rest as normal.

Keeps engine in a decent torque region and isn't a huge sudden wheel spin inducing shock like a clutch dump.

evos not enough torque to torque steer

insert trollface.jpg

this, they dont make much torque (dat 2L 4 banger lyf) but make up for it with short ass gearing.

a stock one has like 300nm, standard modded ones with an upgraded turbo do ~450nm or so

Organic clutch? It's not nice to it but it gets you away with minimal wheel spin, revs up to 4-5k and slip the shit out of it though first til about 4k then let it fully grip and shift the rest as normal.

Keeps engine in a decent torque region and isn't a huge sudden wheel spin inducing shock like a clutch dump.

lol nope. My wheels skip even just trying to drive off at the lights. dat 4-puck clutch plus +100NM @ 2,000rpm in FWD.

i got the kinugawa kit, has worked flawlessly so far.

Noice. Cheapest I see on fleabay is $65 +$30 shipping, though? Kinugawa web I see it for $45 (USD presumably) without shipping. But still relatively cheap, and have read that they are sweet for the purpose as you say (their turbos on the otherhand... lolz)

lol nope. My wheels skip even just trying to drive off at the lights. dat 4-puck clutch plus +100NM @ 2,000rpm in FWD.

:(

the emo launches hard if you do that, as soon as you start slipping the clutch you can hear the turbo start spooling and you are off.

6k clutch dumps are just too violent on the driveline personally, id rather replace a clutch than a gearbox, diff or transfer case.

Noice. Cheapest I see on fleabay is $65 +$30 shipping, though? Kinugawa web I see it for $45 (USD presumably) without shipping. But still relatively cheap, and have read that they are sweet for the purpose as you say (their turbos on the otherhand... lolz)

i got it from ebay, what ever the price was at the time, fast postage and the kit comes with everything required.

their turbos dont seem to be that bad for skylines, for the emos you pretty much want to stick to the high flow stock ones unless chasing big KW numbers as nothing else gives as good response/driving feel.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...