Jump to content
SAU Community

Recommended Posts

Those ladyboys tickles your fancy Nick?

lol, avoiding Phuket as much as I can, wil be just the direct flight to there. Then moving around within the country

Will be heading the the more relaxing places like koh samui

It's ok I don't get "paid" no safety net ere no union set exorbitant rates only what customer is happy to pay ;)

Your move.

Your customers set your rate do they?

The builders pay our rate, so using your logic, they must be happy to do so.

Everyone always wants to pay less for the same thing, don't let yourself believe otherwise.

nope builders don't set your rate and you know it they don't get a choice, just like McDonald's has to pay according to award.

Of course everyone wants to pay less. Pretty sure seen numerous instances of unions crying over cheaper labor being brought in so they strike and abuse non union members.

Our company actually get paid more as people can see the benefit of using us

don't worry brah just stirring ya

Edited by alr33x

nope builders don't set your rate and you know it they don't get a choice, just like McDonald's has to pay according to award.

Of course everyone wants to pay less. Pretty sure seen numerous instances of unions crying over cheaper labor being brought in so they strike and abuse non union members.

Our company actually get paid more as people can see the benefit of using us

don't worry brah just stirring ya

So you're for bringing in overseas, under qualified and unlicensed workers? So you'd be happy for your company to fly in some Indians who will do your job for minimum wage, no commission, which they'll do without any argument because it's far better than what they're getting back home.

That's exactly what they try to do in our industry, the only difference being that in our industry, under qualified and unlicensed workers don't know what they're doing, but who cares about peoples lives when there's money to be saved.

So you're for bringing in overseas, under qualified and unlicensed workers? So you'd be happy for your company to fly in some Indians who will do your job for minimum wage, no commission, which they'll do without any argument because it's far better than what they're getting back home.

That's exactly what they try to do in our industry, the only difference being that in our industry, under qualified and unlicensed workers don't know what they're doing, but who cares about peoples lives when there's money to be saved.

Proud to be union

Nah but f**k useless overseas workers who don't know what they're doing. More dezzman is what we need

So you're for bringing in overseas, under qualified and unlicensed workers? So you'd be happy for your company to fly in some Indians who will do your job for minimum wage, no commission, which they'll do without any argument because it's far better than what they're getting back home.

That's exactly what they try to do in our industry, the only difference being that in our industry, under qualified and unlicensed workers don't know what they're doing, but who cares about peoples lives when there's money to be saved.

Under qualified would be debatable I mean really certain aspects are universal. I got no issues on unions protecting safety of workers. It's the rest of the bs that goes with it that is a bit rich since 95% of workers don't get anywhere near the protection or benefits that unions inflict and if they don't get their way they strike and hold companies, governments and the public as a hole to ransom.

Plenty of Indians(and other nationalities) do my job and charge Fark all but none of them are major players in the market as clients can see a clear difference and benefit.

Moh - your talking domestic it's completely different and they don't get paid that well

Edited by alr33x

Under qualified would be debatable I mean really certain aspects are universal. I got no issues on unions protecting safety of workers. It's the rest of the bs that goes with it that is a bit rich since 95% of workers don't get anywhere near the protection or benefits that unions inflict and if they don't get their way they strike and hold companies, governments and the public as a hole to ransom.

Plenty of Indians(and other nationalities) do my job and charge Fark all but none of them are major players in the market as clients can see a clear difference and benefit.

Moh - your talking domestic it's completely different and they don't get paid that well

I can guarantee you the 'sparkies' they want to bring in to do our job for chicken feed are not nearly up to the standard that's required to get your A grade license here. Nor do they hold the necessary license, instead they're given one because it suits the powers that brought them here.

As for implying that its all cushy in the construction industry, you really don't know anything. Sure we don't usually have to climb in roof spaces but there are things we do on a daily basis where safety is put aside as its not practical to do 'safely'.

The union mentality that you describe barely exists these days. Getting rained off is a rarity as sites are designed so that it doesn't happen. Being heated off is a rarity as it is usually hottest after 4pm, and that clause is pretty much in there because we're forced to work in long sleeves pants gloves glasses and helmets. So when it sits at 34.9 all day, stiff shit, we work in it. Domestic don't get heated off but they do wear whatever they want, shorts singlets no top etc.

And just like the Indians in your industry that you mentioned, the smaller or domestic companies simply CANNOT deliver the projects our companies can, so I'm not sure how us being paid more is any different to you being paid more than inferior companies.

I'm not referring solely to electricians which is probably the most highly skilled of all the trades - but as a whole labourers, concreters,painters, plasterers and so forth. Even wharf / factory workers these types of roles could be done with cheaper labour with probably little difference to the overall completion of the job.

You would know yourself the difference between domestic and commercial are vast. That was my point to Moh which he will correct me if I'm wrong but his friend sounds like a domestic electrician.

The difference in pay again is yours is regulated,

So to claim we are paid to much is inaccurate as we could work for 3 months and get paid nothing, yes thats the risk we take. Ultimately your company pays X amount regardless of what happens.

Edited by alr33x

You don't perform, you don't get paid... we don't perform we get let go.

I don't know if you think the union won't allow that, but its no difference to any other job, if you're no good they don't keep you plain and simple

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
    • I'm interested,do you still have it?
×
×
  • Create New...