Jump to content
SAU Community

Recommended Posts

Turbo out by lunchtime and scotty's intake pipe arrived - in business! :D

23iz2mf.jpg

What's the best way to torque/tighten the water feed line? It's in a bitch of a spot between the head and the turbo, everything else looks pretty straightforward.

Edited by colourclassic

spray that mother f**ker black right now.

I kinda like the subtle bling-ness of the raw alloy ;)

Highflow in... Had to slightly tweak the coolant inlet hardline, and completely remove and reshape the coolant outlet line. All fresh genuine gaskets/washers so hopefully I don't have to do this twice :)

b539rc.jpg

When exactly am I supposed to start feeling grown up? I'm 23 now, and I still don't feel it.

Also, am picking my new Skyline up later today. Much excite.

when you sell that skyline you just bought

when you sell that skyline you just bought

dam you read my mind!

inb4 butthurt skyline drivers :P

you should feel grown up once you realize you're working full time for almost the rest of your life and it's the same shit everyday & only live for the weekends

oh how I miss school / shenanigans now lol :(

Edited by UNR33L
Hey Leroy, you still getting tuned today?

apparently. I gotta pick it up from fabrication today... getting stuffed over a bit.

will call Cihan later cause he hasn't given me a time or address.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...