Jump to content
SAU Community

Recommended Posts

You can do that with a GTS-T though, to much the same degree...injectors are my only give away cause I cbf spraying them the standard colour.

Return flow IC is legal as long as you don't have a pod.

When I drove a GTR I wasn't impressed. Maybe it had been talked up or I don't hit the corners enough to justify having AWD, but having come from a well sorted GTS-T, I wouldn't pay the extra money.

You can do that with a GTS-T though, to much the same degree...injectors are my only give away cause I cbf spraying them the standard colour.

Return flow IC is legal as long as you don't have a pod.

When I drove a GTR I wasn't impressed. Maybe it had been talked up or I don't hit the corners enough to justify having AWD, but having come from a well sorted GTS-T, I wouldn't pay the extra money.

This is true, but once you start going bigger turbos (to 300kw levels) you need custom intake pipes and return flow coolers start to max out not long after 300kw in most cases. It just sucks cos anymore power than that and you're gonna get reamed by Pettet.

Also yes you're right, GOOD GTR's are very very few and far between.

Fair call

I think GTRs had a bit more value to them when GTS-T modifications weren't so available. Can make stupid power with GTS-Ts for so little cost these days...even with a RacePace tune :P

When I drove your 32R I wasn't overly impressed tbh, it felt like it had a bunch more low/mid range pull, but I still would prefer my GTST any day of the week.

Then again, since it wasn't mine and most likely not covered by insurance, there was no way I was pushing it at all. So I wouldn't have been able to feel how it performs at anything close to the limit when cornering, so 4wd vs rwd made no difference.

Unrelated;

After hail damage, front bar scrapes, bonnet chips, mismatching panel colours from previous repairs, aging paint and now a rear ender...I may be respraying the R33.

Colour suggestions?

Unrelated;

After hail damage, front bar scrapes, bonnet chips, mismatching panel colours from previous repairs, aging paint and now a rear ender...I may be respraying the R33.

Colour suggestions?

Pink with some blue and yellow bits like your avatar.

This is true, but once you start going bigger turbos (to 300kw levels) you need custom intake pipes and return flow coolers start to max out not long after 300kw in most cases.

I have seen 500kw through stock GTR pipes, cooler and airbox, and also 430kw through a gtst with a return flow cooler. I have no idea where the idea these parts don't support more power started, but they were probably trying to sell their overpriced products.

Yes, the rubber gtst intake will definitely suck shut at around 250kw but it's a simple mod to replace the intake, and painted black it is barely noticeable. I still don't know if a replacement intake is legal though, as they only seem to mention pod filters.

Technically it's an intake mod, so if combined with FMIC, then it's illegal

So you can't have intercooler pipes then.

Also, my car came with a front mount cooler, so upgrading it isn't a mod correct?

The specific rule mentions intake modifications, so I guess it depends if the officer recognises or acknowledges it as a modification.

At 270 I'm still using the standard intake pipe, but I think Chris put a spring inside there or something from memory?

Did you modify the intake? Yes. It's a modification.

You are just telling yourself what you want to hear.

The law is black and white. If you make more than 1 modification to the intake, it is not legal... Black and white

The rules are only specific on intercoolers and filters, anything else doesn't seem to matter so long as sensors etc are retained.

1. Intake systems
Intake systems are designed to ensure that the correct
air/fuel ratio is available to the engine for the cleanest
burn to minimise exhaust emissions. Systems that
provide excess air or fuel can create high exhaust
emissions from the vehicle. Fuel or other hydrocarbon
vapour that escapes as evaporative emissions can lead
to the formation of photochemical smog.
Replacement air cleaners are permitted provided that
they have all connections and systems present on the
original air cleaner and operate in an identical manner.
(a) Open element or pod type air cleaners on
carburetted vehicles are not permitted.
(b) Dry element pod type air cleaners are
permitted on EFI vehicles. Oiled, oil-soaked or
fluid-treated elements are not permitted. Any
sensors integral to the original system must be
retrofitted to the same approximate location.
© Intercoolers that are larger than standard or
have a different mounting location or are added
where none were originally fitted, are permitted
only if no other changes to the intake system
have been made. In other words, you may have
a pod filter or modified/added intercooler, but
not both. Any sensors integral to the original
intercooler or intake system must be retrofitted
and be in the correct location.
Note: aftermarket turbocharging kits that
include intercoolers that have been type tested
(ADR certified) for the model vehicle are
permitted. Documentary proof must be
retained to substantiate this.
(d) Airflow meters must not be disconnected. They
may be relocated, provided they are
functionally equivalent and are in the same
approximate location.
(e) Modified or aftermarket plenum chambers or
throttle bodies are not permitted.

Did you modify the intake? Yes. It's a modification.

You are just telling yourself what you want to hear.

The law is black and white. If you make more than 1 modification to the intake, it is not legal... Black and white

Did you modify the intake? Yes. It's a modification.

You are just telling yourself what you want to hear.

The law is black and white. If you make more than 1 modification to the intake, it is not legal... Black and white

Unless 4wd, as they can legally fit a turbo kit so I am told. :P

Anything is legal as far as the EPA goes, as long as you run straight gas. I would be taking my case to court if defected, as ethanol should be included along with gas (seeing the emissions are better than LPG vehicles.)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...