Jump to content
SAU Community

Recommended Posts

Exhaust, tune, and enough boost should yield anywhere up to 300, that'll keep me entertained. Not sure about stock power, maybe 180 or so. It's massively held back from factory

Feels good Alex, cops / other hoons seem unaware which suits me fine. Trying to fly under the radar after the theft

On my old 335i, I had:

JB4

Downpipes.

Air filters.

Charge pipe.

Meth kit.

That got it to exactly 300rwkw. If you have the n54 engine, just get ready for HPFP and Injectors to die lol....

Nah not much cheap going around here depending what you wanna spend Id investigate waterline in Williamstown new development of apartments hot location long settlements can't go wrong

Trust me I'm a salesman!

Have you got dual clutch ric?

What kind of rent prices are they looking at their Alex?

To be honest I don't really care where or what I buy, as long as the rent I get is decent, and it's newish so I get the tax benefits (my understanding of that aspect is limited, but from what I've been told, newer the better)

Budget would be up to about $400k I'd say

What kind of rent prices are they looking at their Alex?

To be honest I don't really care where or what I buy, as long as the rent I get is decent, and it's newish so I get the tax benefits (my understanding of that aspect is limited, but from what I've been told, newer the better)

Budget would be up to about $400k I'd say

multi million dollar apartment, kgo

Have you got dual clutch ric?

Nah I've got dual balls so bought a manual ;)

On my old 335i, I had:

JB4

Downpipes.

Air filters.

Charge pipe.

Meth kit.

That got it to exactly 300rwkw. If you have the n54 engine, just get ready for HPFP and Injectors to die lol....

Already replaced under warranty thankfully! How'd you find it at that power level?

On my old 335i, I had:

JB4

Downpipes.

Air filters.

Charge pipe.

Meth kit.

That got it to exactly 300rwkw. If you have the n54 engine, just get ready for HPFP and Injectors to die lol....

Nice

If the 4 door weren't so ugly it would be on the consideration list

What kind of rent prices are they looking at their Alex?

To be honest I don't really care where or what I buy, as long as the rent I get is decent, and it's newish so I get the tax benefits (my understanding of that aspect is limited, but from what I've been told, newer the better)

Budget would be up to about $400k I'd say

Not sure man it's not my core area but it's blue chip so I think you'd get a decent return

Nah I've got dual balls so bought a manual ;)

Already replaced under warranty thankfully! How'd you find it at that power level?

Very good.

Power was linear and it was a fair bit quicker than the e93 m3 that I replaced it with.

Best of all, it wasn't too expensive, all up it cost around 3 to 3.5k including labour.

Nice

If the 4 door weren't so ugly it would be on the consideration list

Yeah the e90s look a bit dated now. That said I've seen some nice examples...

  • Like 1

What kind of rent prices are they looking at their Alex?

To be honest I don't really care where or what I buy, as long as the rent I get is decent, and it's newish so I get the tax benefits (my understanding of that aspect is limited, but from what I've been told, newer the better)

Budget would be up to about $400k I'd say

Decisions shouldn't always be around tax

Just because you get about 30cents back for ever $1 you spend doesn't mean you always should

Know what I mean jellybean

  • Like 1

Not sure man it's not my core area but it's blue chip so I think you'd get a decent return

I'll speak to Jess about it... she was gonna handle my rental anyway..

Decisions shouldn't always be around tax

Just because you get about 30cents back for ever $1 you spend doesn't mean you always should

Know what I mean jellybean

Not really, no.

But yeah obviously there's more to it than tax benefits...but if the rent is a good amount, and there's demand to rent there, then in theory it should be ok..

Rental prices dropping in clayton.

Went from house on half-block in clayton to same size house on bigger block + outdoor area and garage in rowville for $50 less a week.

Old house was on the market for over 6 weeks and had to drop $20 a week to fill it.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...