Jump to content
SAU Community

Recommended Posts

That rad little bit of meat you get that's more tender than the rest of a rump is a rump cap, not an eye fillet.

the best bit in brazilian BBQ..well in brazil anyhow

https://en.wikipedia.org/wiki/Picanha

so damn tasty

That rad little bit of meat you get that's more tender than the rest of a rump is a rump cap, not an eye fillet.

I didn't say it was eye fillet did I? What if the whole rump is tender? One massive rump cap?

I didn't say it was eye fillet did I? What if the whole rump is tender? One massive rump cap?

Way to ensure rump is tender is to cook it well (duh) and then be sure to slice it AGAINST the grain. With most other cuts you can get away with it, but rump & oyster blade/skirt/hanger/flank you really can't

So today I was speaking to some senior IT consultant regarding access to a system.

First time I have ever spoken to the dude and he doesn't know me from a bar of soap.

He was having trouble understanding just why lower levels of support refused to donthe obvious thing and give me access... then he rips out the best bit of casual racism I have heard since joining the corporate world...

"Im not racist but..."

Now you know shit is alwaya gonna be massively racist as soon as you hear that old chestnut....

"Now I'm not racist but it's all been outsourced to some f**king chocolate drop in a cage somewhere"

Lulz

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...